ISSN 1991-2927
 

ACP № 1 (55) 2019

'Automation of Control processes' # 2 (28) 2012

Contents
ELECTRICAL ENGINEERING AND ELECTRONICS

Vladimir Vasilyevich Sukhov, Joint Stock-Company Concern Morinformsystem-Agat (Moscow), Candidate of Engineering; graduated from the Faculty of Machine-Building of Bauman Moscow State Technical University; leading staff scientist at Joint Stock-Company Concern Morinformsystem-Agat (Moscow); author of articles, holds patents in the field of trials and calculations of dynamics and strength of radio equipment, systems of vibration isolation, vibroacoustic and noise characteristics, thermal conditions [e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it. ]V. Sukhov

Development of Cooling Systems in Thermoelectric Coolers in Order to Improve Effectiveness of Heat Removal 28_12.pdf

The article deals with actual issues concerning design of radioelectronic equipment, connected to researches in different schemes of cooling systems, and gives experimental and analytic analysis of the use of the cabinet Baget-VMF based on the principles of Evromekhanika for removal of heat-generation power of from 120 W to 500 W, using natural, liquid, air systems of cooling. The article also gives an analysis of the use of thermoelectric cooling systems, consid-ers advantages and disadvantages of each listed cooling systems.

Radioelectronic equipment, cooling system, thermal conditions, thermoelectric cooler, power of heat generation.

INFORMATION SYSTEMS

Andrey Valentinovich Tsarevsky, Federal Research-and-Production Center Open Joint-Stock Company Research-and Production Association Mars, Candidate of Engineering, graduated from the Faculty of Physics at Kazan State University; chief specialist at Federal Research-and-Production Center Open Joint-Stock Company Research-and Production Association Mars; specializes in the field of information support for special-purpose computer-aided systems [e-mail: charevsk@mail.ru]A. Tsarevsky

Integral Evaluation of Complexity for Algorithms of Generation and Processing of Information Flow 28_3.pdf

The article deals with a complex analysis of topological complexity of algorithms for generation of tests and data processing in special-purpose systems for information exchange. The author got integral quantitative measures of algorithm complexity and testing for two structures of in-formation flow.

Design of computer-aided c2 systems, software complexity metrics, software design.

ELECTRICAL ENGINEERING AND ELECTRONICS

Gennady Nikolayevich Abramov, Togliatti State University, Doctor of Engineering, Professor at the Chair Industrial Electronics of Togliatti State University; Honored Worker of Higher Professional Education of Russia; is interested in analog-digital and digital-analog conversions of multipulse electric signals (MIES) [e-mail: yuran_a@mail.ru]G. Abramov,

Yury Gennadyevich Abramov, Togliatti State University, post-graduate student at Togliatti State University; is interested in analog-digital conversions of MIES parameters [e-mail: yuran_a@mail.ru]Y. Abramov

Improvement of Techical Characteristics of Time-code Recycle Transformers With Chro-notronic Interpolators 28_11.pdf

The article suggests measures for improvement of transformation accuracy of time-code recycle transformers with chronotronic interpolators by 2 times by means of reducing the instability of discrecity transformation as well as reducing extra hardware and time costs when calculation of common digital conversion result.Key words: recycle transmitter, time interval, single parallel code, chronotromic interpolator

Recycle transformer, time interval, single parallel code, chronotronic interpolator.

MATHEMATICAL MODELING

Sergey Nikolaevich Nazarov, Ulyanovsk State Technical University, Candidate of Engineering; graduated from the Military Commu-nications Academy named after S. Budenny; finished his post-graduate study at Ulyanovsk Higher Military Communications Engineering College; doctoral student at Ulyanovsk State Technical University; Associate Professor at the Informatics Chair of Ulyanovsk Higher Civil Aviation School; author of articles and publications in the field of modeling of systems and net-works of wireless data transfer [e-mail: art3456@rambler.ru]S. Nazarov,

Natalia Andreevna Kaseeva, Ulyanovsk Higher Civil Aviation School, cadet at Ulyanovsk Higher Civil Aviation School; author of arti-cles and publications in the field of modeling of systems and networks of wireless data transfer [e-mail: nat53880735@yandex.ru]N. Kaseeva

Application of the Theory of Matching to Enhance the Operation Efficiency of Highly-Mobile Subscribers28_9.pdf

The article deals with an algorithm developed for control of movement of remote-controlled un-manned underwater vehicle connected with carrying ship by a cable. The algorithm uses fuzzy-logic methods with neuron network settings of controlparameters, so that the result of PID-controllers work is reproduced. The algorithm can be used to reproduce other controllers and makes it a universal instrument to create high-performance systems for automatic control.

highly-mobile subscriber, modulation circuit, packet profile, successful handover probability, mobile-platform local area network, repeater, zone dispatcher, set of conformity, power vector, transmission capacity of system, complete weighted bipartite graph, macro Diversity handover

COMPUTER-AIDED ENGINEERING

Alexey Vradimirovich Kurepin, Ulyanovsk State Technical University, master of computer science, graduated from Faculty of Information Systems and Technologies at Ulyanovsk State Technical University (UlSTU), head of department of telecommunication UlSTU. Has publications in the area of design of networks system and applications. Area of expertise - control system design based on code generation [e-mail: 1esha@ulstu.ru]A. Kurepin,

Viktor NIkolaevich Negoda, Ulyanovsk Technical Insitute, Doctor of Engineering, graduated from radio engineering department of Ulyanovsk Technical Insitute, professor at computer science chair, UlSTU. Has publications in the area of computer-aided design of embedded systems. Area of expertise - computer-aided design of technical systems with logical control [e-mail: nvn@ulstu.ru]V. Negoda

Computer-Aided Design for Implementations of Networking Protocols of Distributed Control Systems28_10.pdf

This article discusses the computer-aided design of distributed control system communication protocol implementation by using industrial Ethernet, field bus low-level protocols and corporate multitasking mode. The distinctive features of the proposed approach are the interrelated accomplishment of following project jobs: the generation of communication program code, simulation of control functions in net simulator area, traffic genetation depending on control process.

Distributed control system, communication protocols, software generation, computer-aided testing.

MATHEMATICAL MODELING

Anton Alexeevich Romanov, Ulyanovsk State Technical University, post-graduate student at the Chair of Information Systems of Ulyanovsk State Technical University; graduated from the Faculty of Information Systems and Technology of Ulyanovsk State Technical University; author of articles in the field of intellectual systems for data storage and processing [e-mail: romanov73@gmail.com]A. Romanov

Time-Series Modeling and Forecasting Based on F-Transformation Method28_5.pdf

The paper describes a forecast method for components of vector trend, an algorithm of F-transform for time series, solving of remainders, inverse F-transform, reconstruction of time se-ries based on forecasted trends, as well as analyses the method application.

F-transform, forecast, time series.

ARTIFICIAL INTELLIGENCE

Rinat Damirovich Shigapov, Federal Research-and-Production Center Open Joint-Stock Company Research-and-Production Association Mars, post-graduate student; graduated from the Faculty of Radioengineering of Ulyanovsk State Technical University; programmer at Federal Research-and-Production Center Open Joint-Stock Company Research-and-Production Association Mars; author of articles in the field of control of sea mobile objects [e-mail: shigap@hotmail.com]R. Shigapov

Training of Neuro-Fuzzy Control System to Characteristics of a Given Control System for Unmanned Underwater Vehicle Movement28_8.pdf

The article deals with an algorithm developed for control of movement of remote-controlled un-manned underwater vehicle connected with carrying ship by a cable. The algorithm uses fuzzy-logic methods with neuron network settings of controlparameters, so that the result of PID-controllers work is reproduced. The algorithm can be used to reproduce other controllers and makes it a universal instrument to create high-performance systems for automatic control.

Remote-controlled, unmanned underwater vehicle, control, neural, fuzzy, cable, extensible, regulator, adaptive.

MATHEMATICAL MODELING

Vladimir Nikolaevich Moiseev, Ulyanovsk Instrument Manufacturing Design Bureau, PJSC, post-graduate student at Ulyanovsk State Technical University; graduated from the Faculty of Economics and Mathematics of Ulyanovsk State Technical University in the profession Applied Mathematics; engineer at a calculation and theory department of Ulyanovsk Instrument Manufacturing Design Bureau, PJSC; author of articles, inventions in the field of air pressure probes of aircraft airdata measuring systems [e-mail: v.n.moiseev@mail.ru]V. Moiseev,

Ivan Petrovich Efimov, Ulyanovsk State Technical University, Candidate of engineering sciences, has graduated from the Ulyanovsk Polytechnical Institute with a speciality Aircraft instrument engineering. The senior lecturer of Measuring and Computing Complexes Department of Ulyanovsk State Technical University. He has articles, inventions in the field of primary pressure sensors of aircraft airdata measuring systems [e-mail: е-mail: eip@ulstu.ru]I. Efimov,

Mikhail Iurievich Sorokin, Ulyanovsk Instrument Manufacturing Design Bureau, PJSC, Candidate of Engineering; graduated from the Faculty of Information Systems and Technology of Ulyanovsk State Technical University; head of a department at Ulyanovsk Instrument Manufacturing Design Bureau, PJSC; author of articles, inventions in the field of air pressure probes of aircraft airdata measuring systems [e-mail: rto@ukbp.ru]M. Sorokin,

Alexander Andreevich Pavlovsky, Ulyanovsk Instrument Manufacturing Design Bureau, PJSC, graduated from the Faculty of Aircraft Construction of Kharkov Space University; head of a crew at Ulyanovsk Instrument Manufacturing Design Bureau, PJSC; author of inventions in the field of air pressure probes of aircraft airdata measuring systems [e-mail: rto@ukbp.ru]A. Pavlovsky

Comparison of Results of Simulation and Experimental Study of the Total Pressure Head Ппд-с1 28_4.pdf

The article compares results of a simulation and an experimental study of the onboard total air pressure head ППД-С1 and evaluates the applicability of a simulation software for gas flow OpenFOAM for a task of total air pressure head. The paper also considers impact of flow skew to measurement error of total pressure.

Simulation, total pressure head, turbulence model.

ARTIFICIAL INTELLIGENCE

Aleksei Mikhailovich Namestnikov, Ulyanovsk State Technical University, Candidate of Engineering, Associate Professor; graduated from the Faculty of Radioengineering of Ulyanovsk State Technical University; Associate Professor at the Chair Information Systems of the Faculty of Information Systems and Technology of Ulyanovsk State Technical University; author of articles and a monograph in the field of intelligent systems for storage and processing of information [e-mail: nam@ulstu.ru]A. Namestnikov,

Ruslan Ayratovich Subkhangulov, Ulyanovsk State Technical University, post-graduate student at the Chair Information Systems of Ulyanovsk State Technical University; graduated from the Faculty of Information Systems and Technology of Ulyanovsk State Technical University; author of articles in the field of intellectual systems for storage and processing of information [e-mail: subkhangulov-ruslan@yandex.ru]R. Subkhangulov

Development of Instrument of Ontology Engineering in Intellectual Design Repository 28_7.pdf

The present article is a result of researches whose important part is associated with the building of ontology of application of a design repository and the environment of its development. The paper deals with a concept of ontology from the point of view of informatics, presents a detailed description of subject-oriented editor of ontology, developed to solve tasks of intellectual analy-sis of design documents.

Ontology, rdf, indexing, design document, concept, term.

MATHEMATICAL MODELING

Innokentiy Vasilyevich Semushin, Ulyanovsk State University, Doctor of Science in Engineering, Professor of Information Technology Department at Ulyanovsk State University (UlSU); author of papers, monographs and textbooks; holds patents for inventions; is interested in filtering and control under uncertainty [e-mail: kentvsem @yandex. ru]I. Semushin,

Yulia Vladimirovna Tsyganova, Ulyanovsk State University, Doctor of Philosophy in Physics and Mathematics, Associate Professor of Information Technology Department at UlSU; author and co-author of monograph, papers, and textbooks; is interested in parameter identification, adaptive filtering, and numerically efficient algorithms for stochastic systems [e-mail: tsyganovajv@ mail.ru]Y. Tsyganova,

Natalia Dmitrievna Starostina, Ulyanovsk State University, post-graduate student of Information Technology Department at UlSU; graduated from Mathematics and Information Technology Faculty of UlSU with the specialty in «Applied Mathematics»; is interested in computational methods of estimation and control [e-mail: kapelika88@mail.ru]N. Starostina

Algorithms for Solving Inverse Riccati Equation for Discrete Control Tasks 28_1.pdf

Robust algorithms for linear-quadratic regulator (LQR) within the structure of receding horizon control are considered based on scalarized square-root implementations.

Lqg-control, scalarized square-root algorithms, receding horizon control, orthogonalization.

ARTIFICIAL INTELLIGENCE

Stanislav Vladislavovich Zhukov, Ulyanovsk State University, graduated from the Faculty of Economical Cybernetics of Moscow Institute of Economics and Statistics; doctoral candidate at Ulyanovsk State University [e-mail: texthapb@mail.ru]S. Zhukov,

Vladimir Anatolyevich Maklaev, Federal Research-and-Production Center Open Joint-Stock Company Research-and-Production Association Mars, Candidate of Engineering, graduated from the Faculty of Radioengineering of Ulyanovsk Polytechnic Institute; Director General of Federal Research-and-Production Center Open Joint-Stock Company Research-and-Production Association Mars; author of articles in the field of CAD [e-mail: mars@mv.ru]V. Maklaev,

Petr Ivanovich Sosnin, Ulyanovsk State Technical University, honored worker of the Higher School of the Russian Federation, Doctor of Engineering, Professor; graduated from the Faculty of Radioengineering of Ulyanovsk Polytechnic Institute; head of the Chair Computers at Ulyanovsk State Technical University; author of numerous papers in the field of conceptual design of computer-aided systems [e-mail: sosnin@ulstu.ru]P. Sosnin

Label Security of Design Tasks When Developing Computer-aided Systems 28_6.pdf

The article presents a system of means for label security of design tasks when developing com-puter-aided systems. The peculiarity of the suggested means determines homogenous hierar-chical presentation of the tasks and organizational structure of project teams. The operational interaction among developers is provided by software agents. The system of security means is implemented as an extension of the tool modeling environment WIQA.Net servicing conceptual design of computer-aided systems.

Computer-aided design, information security, label security, software agents, design tasks.

AUTOMATED CONTROL SYSTEMS

Boris Vladimirovich Kruglov, Federal Research-and- Production Center Open Joint-Stock Company Research-and Production Association Mars, [e-mail: boris_kruglov@mail.ru]B. Kruglov

Use of Computer-aided Planning Facilities for Design of Operational Systems of Computer-aided Control Systems 28_2.pdf

The article deals with control subsystem in the structure of systems for computer-aided design (CAD) of computer-aided control systems, sets a task of the development of operational systems at the stages of draft and detailed designs. It also reviews existing facilities for project manage-ment, their capabilities in optimization of project-design schedule and suggests a solution for optimization of works on design of operational systems for computer-aided control systems, based on optimal distribution of resources, using scheduling theory.

Design of computer-aided control systems, scheduling theory, simulation.

© FRPC JSC 'RPA 'Mars', 2009-2018 The web-site runs on Joomla!