|
Main / Archive /'Automation of Control Processes' # 1 (31) 2013
'Automation of Control Processes' # 1 (31) 2013
Contents
AUTOMATED CONTROL SYSTEMS
Sergey Alexanderovich Ageev, Military Communications Academy (St. Petersburg), Candidate of Engineering, Associate Professor, advanced doctoral student of the
Military Communications Academy (St. Petersburg); graduated from the Faculty of Radioengineering of Ulyanovsk
Polytechnic Institute; head of a scientific and technical centre of Federal State Unitary Enterprise Central
Communications Research Institute - Leningrad Department of Central Communications Research Institute; specializes
in the field of telecommunications-system design; author of articles, patents in the field of data-transfer systems [e-mail:
This email address is being protected from spambots. You need JavaScript enabled to view it.
]S. Ageev, Igor Borisovich Saenko, St. Petersburg Institute for Informatics and Automation of the Russian Academy of sciences, Doctor of Engineering, Professor, graduated from the Military Communications Academy,
completed his post-graduate and advanced doctoral programs at the same academy; leading staff scientist at
St. Petersburg Institute for Informatics and Automation of the Russian Academy of sciences (St. Petersburg),
specializes in the field of creation and development of information-management systems; author of monographs,
articles and patents in this field [e-mail:
This email address is being protected from spambots. You need JavaScript enabled to view it.
]I. Saenko, Yury Petrovich Egorov, Federal Research-and-
Production Center Open Joint-Stock Company Research-and-Production Association Mars (Ulyanovsk), Doctor of Engineering, Professor; graduated from the Faculty of Radioengineering of
Leningrad Higher Marine School named after admiral S. Makarov; chief staff scientist at Federal Research-and-
Production Center Open Joint-Stock Company Research-and-Production Association Mars (Ulyanovsk); specializes
in the field of macro-design of large-scale information-management systems; author of monographs, articles, patents
in the field of design of computer-aided C2 systems for troop control [e-mail:
This email address is being protected from spambots. You need JavaScript enabled to view it.
]Y. Egorov, Evgeny Igorevich Zozulia, Federal State Unitary Enterprise Central Communications
Research Institute - Leningrad Department of Central Communications Research Institute, Post-graduate student of St. Petersburg National Research University of Information
Technologies, Mechanics and Optics; graduated from St. Petersburg University ITMO, the Faculty of Information
Technologies and Programming; head of Laboratory at Federal State Unitary Enterprise Central Communications
Research Institute - Leningrad Department of Central Communications Research Institute; specializes in the field of
creation and development of large-scale information-management systems for troop control [e-mail: eugenezozulia@
gmail.com]E. Zozulia, Anatoly Afanasyevich Gladkikh, Ulyanovsk
State Technical University, Candidate of Engineering; Professor at the Telecommunications Chair of Ulyanovsk
State Technical University; graduated from the Military Communications Academy named after S. Budenny; finished
his post-graduate studies at the same academy; is interested in antinoise coding, adaptive management method;
author of monographs articles, patents in this subject area [e-mail:
This email address is being protected from spambots. You need JavaScript enabled to view it.
]A. Gladkikh
|
|
Adaptive Algorithms of Traffic Intensity Estimation in Multiservice Networks
The article presents and researches adaptive algorithms of traffic intensity estimation in multiservice networks of data
transmission. The traffic is interpreted as nonsteady random process of exponential class. The proposed algorithms operate
in near-real-time mode and with quality that is comparable to potentially achievable one. The algorithms can be used for
research and service control of multiservice networks of data transmission. Multiservice network, telematics network services, control automation, stochastic approximation, adaptive management, trend, estimation, random process, adaptive algorithms, traffic intensity.
|
|
Alexander Alexeevich Fedotov, JSC
Concern Morinformsystem-Agat, Doctor of Engineering, Associate Professor, graduated from Daugavpils Higher
Military Aviation Engineering School and the Faculty of Avionics Equipment; Director of MFI-M Management of JSC
Concern Morinformsystem-Agat; author of monograph, chapters of professional study materials, articles in the field
of radar and radar systems, signal processing, and system engineering [e-mail: mfi-m@concern-agat.ru]A. Fedotov, Alexey Mikhailovich Gorev, Joint Stock Company 'Taganrog Telecommunications Research and Development Institute', Candidate of Engineering, graduated from Taganrog Radioengineering University and
the Faculty of Radioengineering Systems; leading staff scientist of a department at the scientific and technical centre
of Joint Stock Company Telecommunications Research and Development Institute; author and contributor of articles
in the field of Electronic Intelligence and Electronic Warfare [e-mail: niis@pbox.ttn.ru]A. Gorev
|
|
Problems in Design of Wide-band Multi-channel Bearing Finders
The article deals with methods of interference immunity and sensitivity improvement of wide-band bearing finders. We
disclose a possibility in principle to take them off into digital beam-forming mode. Problems of the digital beam-forming
mode override of these bearing finders are noted. Wide-band bearing finders, digital beam-forming mode, radio electronic means, antenna arrays.
|
|
Alexander Alexeevich Fedotov, JSC
Concern Morinformsystem-Agat, Doctor of Engineering, Associate Professor, graduated from Daugavpils Higher
Military Aviation Engineering School and the Faculty of Avionics Equipment; director of MFI-M Management of JSC
Concern Morinformsystem-Agat; author of monograph, chapters of professional study materials, articles in the field
of radar and radar systems, signal processing, and system engineering [e-mail: mfi-m@concern-agat.ru]A. Fedotov, Vladimir Fedorovich Shpak, Joint Stock Company 'Taganrog Telecommunications Research and Development Institute', Candidate of Engineering, graduated from Taganrog Radioengineering University and
the Faculty of Radioengineering Systems; head of a laboratory at the scientific and technical centre of Joint Stock
Company Telecommunications Research and Development Institute; author and contributor of articles in the field of
Electronic Intelligence and Electronic Warfare [e-mail: niis@pbox.ttn.ru]V. Shpak
|
|
|
MATHEMATICAL MODELING
Vladimir Nikolaevich Dmitriev, Ulyanovsk State Technical
University, Doctor of Engineering, graduated from the Electromechanical Faculty at Tomsk
Polytechnic Institute, head of the Electric Drive and Automation of Industrial Plants Chair at Ulyanovsk State Technical
University; author of articles and patents in the field of numerical simulation and electromechanical systems [e-mail: dvn@ulstu.ru]V. Dmitriev, Natalia Andreevna Lunina, Ulyanovsk State Technical
University, graduated from the Faculty of Power at Ulyanovsk State Technical University, postgraduate
student of the Electric Drive and Automation of Industrial Plants Chair at Ulyanovsk State Technical
University; author of articles and patents in the field of computational modeling and electromechanical systems [e-mail: n.lunina@live.ru]N. Lunina
|
|
|
Yury Nikolaevich Sankin, Ulyanovsk
State Technical University, Doctor of Engineering, Professor; graduated from the Faculty of Electromechanics
at Leningrad Polytechnic Institute; Professor of the Theoretical and Applied Mechanics Chair at Ulyanovsk
State Technical University; author of monograph and articles in the field of machine tool dynamics [e-mail: sankin66@mail.ru]Y. Sankin
|
|
Turning Machine Stability At Nonlinear Criterion of Cutting Process
The article deals with an issue of maximum turning machines stability at cutting. It offers a frequency criterion of stability
for a nonlinear closed loop system composed of a viscous-elastic linkage with distributed constants. Machine tool dynamics, amplitude-phase-frequency characteristic, machine tool dynamic characteristic.
|
|
Sergey Yurievich Volynshchikov, Ulyanovsk State Technical University, Post-graduate student of the Theoretical and Applied Mechanics Chair at Ulyanovsk
State Technical University, graduated from the Faculty of Building of Ulyanovsk State Technical University; author of
articles in the field of dynamics of shock mechanisms [e-mail: tpm@ulstu.ru]S. Volynshchikov, Vladimir Kuzmich Manzhosov, Ulyanovsk State Technical
University, Doctor of Engineering, Professor, graduated from the Faculty of Machine-Building
of Frunze Polytechnic Institute, holds the Theoretical and Applied Mechanics Chair at Ulyanovsk State Technical
University; author of articles and monographs in the field of dynamics of machines, modeling of shock processes [e-mail: tpm@ulstu.ru; v.manjosov@ulstu.ru]V. Manzhosov
|
|
Calculating Scheme for Wave Processes During Motion of Elastic Rod and Rigid Body
The article presents the model of wave motion of elastic compression rod and rigid body interacting with the rod, with
regard to the unilateral constraint between them. Characteristics of direct and backward waves constituted on the boundary
are built. They generate the field of wave states. A method of numerical calculation taken as a basis for a computational
algorithm is developed. A scheme of checking of the computational process is recommended. Elastic rod, wave processes, interaction of a rod and a rigid body, dilatation wave of deformation, speed of rod cross-sections, rod potential energy, rod kinetic energy, checking of the computational process.
|
|
Vladislav Nikolaevich Kovalnogov, Ulyanovsk State
Technical University, Doctor of Engineering, graduated from the Faculty of Computational Mathematics
and Cybernetics at Kazan State University, head of the Heat and Power Engineering Chair at Ulyanovsk State
Technical University; author of articles, monographs, inventions in the field of modeling, research and optimization
of hydrogasodynamic processes [e-mail: kvn@ulstu.ru]V. Kovalnogov, Ruslan Vladimirovich Fedorov, Ulyanovsk State
Technical University, Candidate of Engineering, graduated from the Faculty of Power at Ulyanovsk State
Technical University, Associate Professor of the Heat and Power Engineering Chair at Ulyanovsk State Technical
University; author of articles, monograph and inventions in the field of modeling and research into gas dynamics of
high-speed disperse flows [e-mail: r.fedorov@ulstu.ru]R. Fedorov, Ekaterina Vladimirovna Tcvetova, Ulyanovsk State Technical University, Graduated from the Faculty of Power at Ulyanovsk State Technical University,
post-graduate student of the Heat and Power Engineering Chair at Ulyanovsk State Technical University; author of
articles and research studies in the field of gas dynamics and heat exchange [e-mail: katf0k@mail.ru]E. Tcvetova, Anton Viacheslavovich Petrov, Ulyanovsk State Technical University, Student of the Faculty of Power at Ulyanovsk State Technical University ; author of
articles and research studies in the field of gas dynamics and heat exchange [e-mail: Antonio-petrik2@mail.ru]A. Petrov
|
|
|
Vladislav Nikolaevich Kovalnogov, Ulyanovsk State
Technical University, Doctor of Engineering, graduated from the Faculty of Computational Mathematics
and Cybernetics at Kazan State University, head of the Heat and Power Engineering Chair at Ulyanovsk State
Technical University; author of articles, monographs, inventions in the field of modeling, research and optimization
of hydrogasodynamic processes [e-mail: kvn@ulstu.ru]V. Kovalnogov, Yury Andreevich Khakhalev, Ulyanovsk State Technical University, Graduated from the Faculty of Power at Ulyanovsk State Technical University, postgraduate
student of the Heat and Power Engineering Chair at Ulyanovsk State Technical University; author of articles
and research studies in the field of hydrogasodynamic processes [e-mail: ulstu-td-ua@mail.ru]Y. Khakhalev
|
|
|
Alexander Kuprianovich Ivanov, Federal Research-and-Production Center Open Joint-
Stock Company Research-and-Production Association Mars, Doctor of Engineering, Honoured master of sciences and engineering of Ulyanovsk
Region; graduated from the Faculty of Physics of Irkutsk State University, graduated from the post-graduate studies
at Moscow Higher technical College named after N.E. Bauman; graduated from higher post-doctorate studies at
Ulyanovsk State Technical University; chief research scientist at Federal Research-and-Production Center Open Joint-
Stock Company Research-and-Production Association Mars; author of a monographs, study letter, articles in the
field of the mathematical modeling of real-time hierarchical computer-aided C2 systems [e-mail: mars@mv.ru]A. Ivanov, Evgeny Serafimovich Kukin, Federal Research-and-Production Center Open
Joint-Stock Company Research-and-Production Association Mars, Candidate of Engineering, Associate Professor, graduated from the Faculty of Physics of
Voronezh State University; deputy chief designer, head of department at Federal Research-and-Production Center Open
Joint-Stock Company Research-and-Production Association Mars; author of articles in the field of the development
of software for computer-aided C2 systems [e-mail: mars@mv.ru]E. Kukin, Anatoly Alexanderovich Kupriyanov, Federal Research-and-Production Center
Open Joint-Stock Company Research-and-Production Association Mars, Candidate of Engineering, Associate Professor, graduated from the Faculty of
Radioengineering Ulyanovsk Polytechnic Institute; leading staff scientist at Federal Research-and-Production Center
Open Joint-Stock Company Research-and-Production Association Mars; is interested in the field of the methodology
of the creation and building of distributed computer systems; author of a monograph, papers and articles in design
and development of local and corporate networks, computer-aided packages, and special- and general-purpose
computer-aided control systems [e-mail: aakur1828@rambler.ru]A. Kupriyanov
|
|
Analysis of Information Systems Functioning
The article deals with a possibility of application of waiting theory to analyze the functioning of information systems while
processing documents flows of different types. Differential and algebraic equation systems describing system states in
stationary and nonstationary operating conditions are built. A possibility of the approximation of parallel elements by one
element with exponential rule of service time distribution is shown. Information systems, waiting theory, intensity of flow, processing performance, differential equation system, algebraic equation system.
|
|
Nikolai Vladimirovich Luchkov, Federal Research-and-Production Center Open Joint-Stock Company Research-and-Production Association Mars, Candidate of Engineering, graduated from the Faculty of Radioengineering and from
post-graduate studies at the Telecommunications Chair of Ulyanovsk State Technical University; research engineer
at Federal Research-and-Production Center Open Joint-Stock Company Research-and-Production Association Mars;
author of articles in the field of statistics methods in signal processing [e-mail: nik-lnv@mail.ru]N. Luchkov
|
|
|
Victor Rostislavovich Krasheninnikov, Ulyanovsk State Technical University, Doctor of Engineering, Professor, graduated from Kazan State University,
head of the Applied Mathematics and Informatics Chair at Ulyanovsk State Technical University; author of works on
statistical methods for signal and image processing [e-mail: kvr@ulstu.ru]V. Krasheninnikov, Rinat Damirovich Shigapov, Federal Research-and-Production Center Open Joint-Stock Company
Research-and-Production Association Mars, Post-graduate student, graduated form the Faculty of Radio Engineering at Ulyanovsk
State Technical University; software engineer at Federal Research-and-Production Center Open Joint-Stock Company
Research-and-Production Association Mars; author of articles in the field of marine mobile objects management [e-mail: shigap@hotmail.com]R. Shigapov
|
|
The Model for Movement of Cable Connecting Carrying Ship With Unmanned Underwater Vehicle
The article shows the results of motion modeling for a cable connecting a surface ship with an unmanned underwater vehicle
(UUV). The model represents the cable as a tensile torsion fiber which consequently simplifies solution of motion equations.
The article uses an algorithm allowing the use of motion equations for a stretched torsion fiber provided the negative tension
arises on it. We have used a simple numerical method to resolve combined cable-motion equations. Cable, tensile, hooke's law, unmanned underwater vehicle.
|
|
Sergey Anatolievich Gaivoronsky, Tomsk Polytechnic University, Candidate of Engineering, Associate Professor, graduated from the Faculty of
Automation and Computer Engineering at Tomsk Order of the October Revolution and the Order of the Red Banner
Polytechnic Institute named after S.M. Kirov; Vice-Rector for Academic Affairs, Director of the Institute of Cybernetics
of the Tomsk Polytechnic University, Associate Professor of Tomsk Polytechnic University; author of articles,
monographs, and patents in the field of analysis and synthesis of robust control systems [e-mail: saga@tpu.ru]S. Gaivoronsky, Tatiana Alexanderovna Ezangina, Tomsk Polytechnic University, Post-graduate student of the Tomsk Polytechnic University; graduated from the
Institute of Cybernetics at the Tomsk Polytechnic University, author of articles, deposit-receipts for software in the
field of robust analysis and and synthesis of automatic control systems [e-mail: eza-tanya@yandex.ru]T. Ezangina
|
|
Pid-controller Setting for Maximization of Stability Degree of Interval System
The article deals with automatic control systems containing a proportional-integrated-differential controller and an interval
control object. A method for synthesis of the controller parameters that ensures maximum stability degree and acceptable
variability for the system is developed by using the root estimation of system quality parameters. Ratio analysis of quality
parameters and accuracy by using the interval analysis is based on the method. The numerical example illustrated the
capability of developed method is given. Interval polynomial, synthesis of controller, maximum stability degree.
|
|
COMPUTER-AIDED ENGINEERING
Vladimir Anatolievich Maklaev, Federal Research-and-Production Center Open Joint-Stock
Company Research-and-Production Association Mars, Candidate of Engineering, graduated from the Faculty of Radioengineering of
Ulyanovsk Polytechnic Institute, Director General of Federal Research-and-Production Center Open Joint-Stock
Company Research-and-Production Association Mars; author of articles in the field of CAD [e-mail: mars@mv.ru]V. Maklaev
|
|
Means and Mechanisms for Synchronization of Informational Resources of Project Organization Experience Base
The article presents means for synchronization of informational resources of project organization experience base which
develops computer-aided system suites. Mechanisms and means for synchronization are oriented at adequate representation
of directory of experience base repository and directory copies saved in informational bases of project groups. Computer-aided design, experience base, informational support, synchronization.
|
|
Konstantin Sergeevich Beliaev, Ulyanovsk State Technical
University, Master of Engineering and Technologies; graduated from Ulyanovsk State Technical
University, post-graduate student of the Computer Engineering Chair at Ulyanovsk State Technical University; author
of articles in the field of CAD [e-mail: k.belyaev@ulstu.ru]K. Beliaev, Vladimir Anatolievich Maklaev, Federal Research-and-Production Center Open Joint-Stock
Company Research-and-Production Association Mars, Candidate of Engineering, graduated from the Faculty of Radioengineering of
Ulyanovsk Polytechnic Institute, Director General of Federal Research-and-Production Center Open Joint-Stock
Company Research-and-Production Association Mars; author of articles in the field of CAD [e-mail: mars@mv.ru]V. Maklaev
|
|
Dynamic Visualization Means for Development of Computer- Aided Systems
The article presents dynamic visualization means used in computer-aided systems development to display the amount of
work of project activity, decision-making and other useful information requiring operational access to work with them. Computer-aided design, dynamic visualization, question-and-answer system, experience base.
|
|
|