ISSN 1991-2927
 

ACP № 3 (53) 2018

'Automation of Control Processes' # 2 (32) 2013

Contents
AUTOMATED CONTROL SYSTEMS

Vladimir Viktorovich Kalnikov, Federal Research-and-Production Center Open Joint-Stock Company ’Research-and-Production Association ’Mars’, Candidate of Engineering, Associate Professor graduated from the Faculty of Radioengineering of Kiev Higher Military Communications Engineering College named after M.Kalinin; Chief Specialist at Federal Research-and-Production Center Open Joint-Stock Company ’Research-and-Production Association ’Mars’; specializes in the field of design of special-purpose control systems, building of communications and data-exchange systems; author of publications, inventions in the field of design of special-purpose distributed control systems, communications and data-exchange systems. [e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it. ]V. Kalnikov,

Aleksandr Ivanovich Moiseev, Federal Research-and-Production Center Open Joint-Stock Company ’Research-and-Production Association ’Mars’, Candidate of Engineering, graduated from the Faculty of Dual Education of Ulyanovsk State University; Leading Engineer at Federal Research-and-Production Center Open Joint-Stock Company ’Research-and-Production Association ’Mars’; specializes in the field of design of special-purpose control systems; author of publications, inventions and registered software systems in the field of research and building of special-purpose distributed control systems [e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it. ]A. Moiseev

Function of Control System of Combat Facilities in Decentralized Mode 32_1.pdf

The issues of Distributed Control Systems (DCS) functioning are examined. A way to a distributed problem solving without a separation of decision-making center is furnished. A generalized solution algorithm is developed. A computing experiment proving the introduced method effectiveness is carried out.

Distributed control systems, decentralized control mode, distributed problem solving algorithm.

Andrey Sergeevich Korsunsky, FRPC OJSC ’RPA ’Mars’, Candidate of Engineering; graduated from the Faculty of Radio-Communications at Ulyanovsk branch of the Military Communications University; finished his post-graduate studies at the Military Communications Academy named after S. Budenny; Chief Specialist at FRPC OJSC ’RPA ’Mars’; author of articles and inventions in the field of radio-electronics protection, communications and information security as well as information transport through wireless channels. [e-mail: aksspb@mail.ru]A. Korsunsky,

Tatiana Nikolaevna Maslennikova, FRPC OJSC ’RPA ’Mars’, Candidate of Engineering; graduated from the Faculty of Radio-Engineering of Ulyanovsk Polytechnic Institute; Head of a research-and-development laboratory at FRPC OJSC ’RPA ’Mars’; author of papers and publications in the field of information support of special-purpose computer-aided systems [e-mail: mars@mv.ru]T. Maslennikova,

Vadim Georgievich Eryshov, Military Communications Academy, [e-mail: eryshov@mail.ru]V. Eryshov

A Simulation Model of an Information Security Analysis System in Computer-aided Systems 32_2.pdf

The article deals with a simulation model of an information security analysis system in computer-aided systems processing the confidential information. Hereafter, the dependences obtained while modeling can form a basis for the analysis of the existing information security analysis systems and for synthesis of new ones.

Information security analysis system, computer-aided system, queuing system, exposure scanner, simulation model.

MATHEMATICAL MODELING

Sergei Pavlovich Bezglasny, Samara State Aerospace University named after Academician S.P. Korolev, Candidate of Physics and Mathematics; Associate Professor at the Deartment of Theoretical Mechanics of Samara State Aerospace University named after Academician S.P. Korolev (National Research University); Doctoral Candidate; graduated from the Faculty of Mechanics and Mathematics of Lomonosov Moscow State University, author of articles in the field of the theoretical mechanics, stability and control theory, and space system dynamic. [e-mail: bezglasnsp@rambler.ru]S. Bezglasny,

Maria Alexandrovna Khudiakova, Samara State Aerospace University named after Academician S.P. Korolev, Post-graduate Student at the Deartment of Theoretical Mechanics of Samara State Aerospace University named after Academician S.P. Korolev (National Research University); graduated from the Faculty of Theoretical mechanics of Aircraft of Samara State Aerospace University, author of articles in the field of the stability and control theory. [e-mail: motya31087@list.ru]M. Khudiakova

Gyrostat Orientation With Variable Moment of Inertia 32_4.pdf

The article examines a problem of a single-axis and a triaxial orientations of the gyrostat system with inertia moment of carrier wich depend on time (a variable structure). The orientation is researched relatively Koenig’s coordinate system and a random non-inertial coordinate system. The problem is solved analytically by the active control construction applied to the system of bodies on the principle of feedback. The stabilizing control and conditions providing a possibility of desired orientation are obtained. This orientation has a property of an asymptotic stability. The assigned task was being solved on the basis of the Lyapunov’s functions method and a method of limit equations and systems which enable to use the Lyapunov’s functions which possess constant signs derivatives.

Gyrostat, program motion, functions with a constant signs, lyapunov's function, asymptotic stability.

Anna Alexandrovna Tcynaeva, Samara State University of Architecture and Civil Engineering, Candidate of Engineering; graduated from Ulyanovsk State Technical University; Associate Professor at the Deartment of Heat-and-gas Supply and Ventilation of Samara State University of Architecture and Civil Engineering; author of development works and articles in the field of mathematical modeling of heat-exchange processes in engineering. [e-mail: a.tsinaeva@rambler.ru]A. Tcynaeva,

Ekaterina Alexandrovna Tcynaeva, Ulyanovsk State Technical University, Candidate of Engineering; graduated from Ulyanovsk State Technical University; Associate Professor at the Deartment of Heat-and-power Engineering of Ulyanovsk State Technical University; author of articles in the field of mathematical modeling of heat-exchange processes in engineering. [e-mail: tsinaeva-kate@rambler.ru]E. Tcynaeva,

Evgeny Vladimirovich Shkolin, Ulyanovsk State Technical University, Student at the Deartment Heat-and-power Engineering of Ulyanovsk State Technical University. Research interests are heat engineering, heat pipes. [e-mail: shkolin-e@ya.ru]E. Shkolin

Mathematical Modeling of the Temperature Stratification of the Modified Leontief Pipe With Heat Pipes 32_5.pdf

Mathematical modeling and numerical investigation of the temperature stratification of the modified Leontief's pipe with heat pipes are conducted. A possibility of intensification of turbulent flows temperature stratification by means of using heat pipes is considered. It is identified that an application of heat pipes enables to increase the efficiency of the temperature stratification of up to three times.

Mathematical modeling, numerical investigation, temperature stratification, heat pipes.

Iurii Vasilevich Kirilin, Ulyanovsk State Technical University, Doctor of Engineering; Professor at Ulyanovsk State Technical University; graduated from the Faculty of Mechanics of Ulyanovsk Polytechnic Institute; author of articles, monographs and inventions in the field of calculation and design of metal-cutting machine tools. [e-mail: kirilin51.ru]Y. Kirilin,

Egor Anatolievich Spiridonov, FRPC OJSC ‘RPA ‘Mars’, [e-mail: gorz111.ru]E. Spiridonov

Simulation of Load-carrying System of Horizontal Milling Machine for Dynamic Characteristic Design Analysis 32_7.pdf

The article presents research results of the calculated dynamic characteristics, notably the results of amplitude-phase-frequency characteristics and resonance vibration mode, as well as the research results of the boring mill characteristics for finding the best design alternatives of load-bearing structure elements, base members and guides.

Rigidity, mechanical compliance, dynamic characteristic, mode shape, vibration stability.

Ruslan Yurievich Martimov, OJSC ‘Vega’ Concern’, graduated from the Faculty of Information Technologies and Programming of St. Petersburg National Research State University of Information Technologies, Mechanics, and Optics; Senior Staff Scientist at St. Petersburg Branch of OJSC ‘Vega’ Concern’; author of articles in the field of digital watermark and stenography. Research interests are digital stenography and cryprtology. [e-mail: Ruslan.Martimov@gmail.com]R. Martimov

Algorithm of Digital Watermark Embedding Based on Noise-type Encoding 32_12.pdf

An algorithm of digital watermark embedding into the reference I-frames of video bitstream using a noise-type encoding is proposed. The algorithm performance is estimated versus the algorithm based on the differential energy embedding.

Stenography, video bitstream, noise-type encoding.

Anatoly Afanasievich Gladkikh, Ulyanovsk State Technical University, Candidate of Engineering, graduated from S.M. Budyonny Military Communication Academy; finished his post-graduate studies at the same academy; Professor at the Department of Telecommunication of Ulyanovsk State Technical University; author of a monograph, text-books, articles, and patents in the field of noise-immune coding and information security. [e-mail: a.gladkikh@ulstu.ru]A. Gladkikh,

Ekaterina Sergeevna Baskakova, Ulyanovsk State Technical University, Post-graduate Student at the Department of Telecommunication of Ulyanovsk State Technical University; graduated from Ulyanovsk State Technical University; author of publications and patents in the field of redundant code soft-decision decoding. [e-mail: bes_forever87@mail.ru]E. Baskakova,

Alexander Alekseevich Maslov, FRPC OJSC ‘RPA ‘MARS’, Chief Designer at FRPC OJSC ‘RPA ‘MARS’, graduated from the Moscow Institute of Engineering and Physics; author of publications and patents of Russian Federation in the field of radiolocation, signal filtering methods and redundant code soft-decision decoding. [e-mail: mars@mv.ru]A. Maslov,

Georgy Mikhailovich Tamrazian, FRPC OJSC ‘RPA ‘MARS’, Post-graduate Student at the Department of Telecommunication of Ulyanovsk State Technical University; Research Engineer at FRPC OJSC ‘RPA ‘MARS’; graduated from Ulyanovsk State Technical University; author of articles in the field of redundant code soft-decision decoding. [e-mail: tamrazz@bk.ru]G. Tamrazian

Effective Decoding of Non-binary Codes Using Erased Element Provocation Method 32_13.pdf

The findings of decoding algorithms for 2D turbo-codes using a method of inner code combinations iterative transformations are presented. It provides the use of redundancy brought into the code at the border of asymptotic code’s abilities. A method of provocation is applied for the testing of final decoding result reliability. It aims to call a predictable non-binary code decoder reaction while correcting an erased code symbol with known parameters. The receiver performance increasing is provided by a fast non-binary code decoding without a trial method application while calculating error position locators.

Soft-decision decoder, iterative process, cascade turbo-code, erasure.

ARTIFICIAL INTELLIGENCE

Pavel Sergeevich Zhukov, Belgorod State Institute, Post-graduate Student at the Deartment of Library science, Bibliography and Bibliology of Belgorod State Institute of Art and Culture; author of articles in the field of automated library systems. [e-mail: ]P. Zhukov,

Sergey Evgenyevich Savotchenko, Belgorod State Institute, Doctor of Physics and Mathematics, Professor; graduated from the Faculty of Physics of Kharkov State University; Professor at the Deartment of Computer science and information and analytical resources of Belgorod State Institute of Art and Culture; author of articles in the field of mathematical modeling, information technologies, and automated library systems. [e-mail: savotchenko@hotbox.ru]S. Savotchenko

Modeling of Information Search in the Database With Semantic Relations 32_3.pdf

The article presents a an information search model based on using descriptors which enables to consider the boundaries of sets as being inexplicit. The queries concept membership functions are defined. The approach considered by the use of semantic relations enables to form boundary sets of both documents corresponding to the descriptors and documents not quite corresponding to a query, but which may be enabled in the future.

Descriptor, information search, semantic relations, paradigmatic relations, information retrieval systems.

Nelli Alekseevna Sedova, Maritime State University, Candidate of Engineering; graduated from Far Eastern Federal University, Institute of Mathematics and Computer Science; Scientific Associate of Training and Research Laboratory for Nonlinear and Intelligence Control Systems of Admiral Nevelskoy Maritime State University; author of articles, patent, and state registration certificates of computer program in the field of water transport operation and navigation. [e-mail: nellyfish81@mail.ru]N. Sedova,

Vladimir Sergeevich Perechesov, Maritime State University, Candidate of Engineering; graduated from Far Eastern State Maritime Academy, Senior Staff Scientist of Training and Research Laboratory for Navigation equipment of Admiral Nevelskoy Maritime State University; author of articles and patents in the field of water transport operation and navigation. [e-mail: perechesov@msun.ru]V. Perechesov,

Viktor Alexandrovich Sedov, Maritime State University, Candidate of Physics and Mathematics; graduated from Far Eastern State Maritime Academy; Senior Staff Scientist at Training and Research Laboratory for Navigation equipment of Admiral Nevelskoy Maritime State University; author of articles in the field of intelligence systems. [e-mail: sedov@msun.ru]V. Sedov

Keeping the Course of Ship Based on Fuzzy Logic With Regard to Vessel Speed 32_11.pdf

An intelligent system based on fuzzy logic is developed in order to keep a course of a ship. This system includes three input linguistic variables such as a true course deviation, a deviation speed, and a speed of a vessel, and one output variable – a rudder blade position of the ship. This article presents the fuzzy sets and corresponding terms of linguistic variables. The base of fuzzy production rules contains 175 rules.

Intelligent system, fuzzy logic, a course of a ship, linguistic variables, fuzzy set.

INFORMATION SYSTEMS

Denis Sergeevich Soloviev, Tambov State Technical University, graduated from the Faculty of Information Technology of Tambov State Technical University; Post-graduate Student at the Deartment of CAD Systems; author of articles, brief outline reports, and state registration certificates of computer programs in the field of mathematical modeling and optimal control for galvanic processes with a cyclic switching-on of anode sections. [e-mail: solovjevdenis@mail.ru]D. Soloviev,

Yuri Vladimirovich Litovka, Tambov State Technical University, Doctor of Engineering, Professor; graduated from the Faculty of Automation of chemical production at Tambov Institute of Chemical Engineering, Professor at the Deartment of CAD Systems; author of articles, brief outline reports, and patents in the field of mathematical modeling, optimal control of technological processes in galvanotechnics, and CAD systems development. [e-mail: polycmem@list.ru]Y. Litovka

Software Solution for Control Automation of Galvanic Processes With a Cyclic Switching-on of Anode Sections 32_6.pdf

This article presents the mathematical problem formulation of optimal control by galvanic processes with a cyclic switching-on of anode sections. The structure of automated control system for technological processes is proposed for problem solving. The main types of control system software are described. Automated search stages of optimal control in system software implementation are considered in a specific context.

Software, automated control system for technological process, galvanic process with a cyclic switching-on of anode sections.

COMPUTER-AIDED ENGINEERING

Gennady Petrovich Tokmakov, FRPC OJSC ‘RPA ‘Mars’, Doctor of Engineering; graduated from the Faculty of Radioengineering of Ulyanovsk Polytechnic Institute; Chief Staff Scientist at FRPC OJSC ‘RPA ‘Mars’; Professor at the Deartment of Computer Engineering of Ulyanovsk State Technical University; author of a monograph, textbooks, articles, and inventions in the field of the development of data models and artificial intelligence systems. [e-mail: mars@mv.ru]G. Tokmakov,

Evgeny Serafimovich Kukin, FRPC OJSC ‘RPA ‘Mars’, Candidate of Engineering; Associate Professor; graduated from the Faculty of Physics of Voronezh State University; Deputy Chief Designer, Head of a department at FRPC OJSC ‘RPA ‘Mars’; author of a monograph and articles in the field of the development of software for computer-aided systems. [e-mail: mars@mv.ru]E. Kukin,

Anna Sergeevna Popova, FRPC OJSC ‘RPA ‘Mars’, Post-graduate Student at Ulyanovsk State Technical University; graduated from the Faculty of Mechanics and Mathematics of Ulyanovsk State University; author of publications in the field of the development of information resources for computer-aided systems [e-mail: mars@mv.ru]A. Popova

Information Resources of Integrated Computer-aided Systems. Computer-aided Engineering of Information Resources 32_8.pdf

The article deals with a method of dataware computer-aided engineering built on information sources which are presented in both binary and text formats. The proposed method of information resource engineering is intended to decrease the work content of dataware creation of computer-aided systems, and to increase the integrated performance of the submitted information by means of conformity and unification of all information resource components.

Xml-формат, information resource, data bases, xml format.

Alexander Nikolaevich Afanasev, Ulyanovsk State Technical University, Doctor of Engineering; graduated from the Faculty of Radioengineering of Ulyanovsk Polytechnical Institute; Director of Institute of Additional distant education; author of articles, monographs, and inventions in the field of development and application of automated systems. [e-mail: a.afanasev@ulstu.ru]A. Afanasev,

Rinat Faiazovich Gainullin, Ulyanovsk State Technical University, Graduate Student at the Deartment of Computer Engineering of Ulyanovsk State Technical University; graduated from the Faculty of Information Systems and Technologies of Ulyanovsk State Technical University; a programmer of Ekvid LLC; author of articles, inventions in the field of development and application of automated systems. [e-mail: r.gainullin@gmail.com]R. Gainullin

Diagram Language Metacompiler 32_9.pdf

A metacompiler of graphics languages on the basis of finite-state RV grammars is offered. The metacompiler allows to build the finite-state grammar of chart language and to generate necessary operations with an internal memory. The constructed grammar possesses a monitoring completeness. The grammar building algorithm exemplified by the UML language activity chart is considered.

Rv-грамматика, rv-grammar, metacompiler, diagram languages.

Tatiana Evgenievna Akimova, PJSC ‘Ulyanovsk Instrumental Manufacturing Design Bureau’, Head of IT Department of PJSC ‘Ulyanovsk Instrumental Manufacturing Design Bureau’; graduated from the Faculty of Mechanics and Mathematics of Lomonosov Moscow State University; author of articles in the field of project and product processes automation and making the unified project and products space of an enterprise. [e-mail: akimovat@bk.ru]T. Akimova,

Vadim Viktorinovich Shishkin, Ulyanovsk State Technical University, Candidate of Engineering, graduated from the Faculty of Radioengineering of Ulyanovsk Polytechnic Institute, Professor at the Department of Measuring calculating complexes of Ulyanovsk State Technical University, author of articles in the field of CAD, intellectual systems, real-time operating systems and embedded systems development. [e-mail: shvv@ulstu.ru]V. Shishkin

Modeling of Integrated Information Environment of the Enter-prise of the Aircraft Instrument Engineering Industry 32_10.pdf

The article describes the information models of integrated information environment of the aircraft instrument engineering industry enterprise. An integrated information environment computer-aided design software package is created based on this model. Such software package enables to describe business processes, generated and used artefacts, data types and formats, applied tools. It also determines the best set of tools for building an effective integrated information environment of the enterprise and information support of Combat Management Systems (CMS) lifecycle.

Information support of product life cycle processes, normative-referenced data management, unified information space, integrated information environment of the enterprise.

Mikhail Yurievich Romodin, FRPC OJSC ‘RPA ‘MARS’, Post-graduate Student at the Chair ‘Computer Engineering’ of Ulyanovsk State Technical University; graduated from the Faculty of Information Systems and Technologies of Ulyanovsk State Technical University; author of articles in the field of CAD. [e-mail: romodin_mihail@mail.ru]M. Romodin,

Yury Aleksandrovich Lapshov, Ulyanovsk State Technical University, has a Master’s degree in Engineering and Technologies; graduated from Ulyanovsk State Technical University; Post-graduate Student at the Chair ‘Computer Engineering’ of Ulyanovsk State Technical University; author of articles in the field of CAD. [e-mail: y.lapshov@mail.ru]Y. Lapshov,

Petr Ivanovich Sosnin, Ulyanovsk State Technical University, Honoured Worker of the Higher School of the Russian Federation; Doctor of Engineering, Professor; graduated from the Faculty of Radioengineering of Ulyanovsk Polytechnic Institute; Head of the Chair ‘Computer Engineering’ of Ulyanovsk State Technical University; author of numerous papers in the field of conceptual design of computer-aided systems. [e-mail: sosnin@ulstu.ru]P. Sosnin

Pseudocode Programming in Conceptual Design of Data Bases 32_14.pdf

The article presents the facilities of design decision pseudocode programming in conceptual design of data bases of computer-aided systems. The proposed approach and its implementation tools are oriented at the experiment with design decision releases in the context of the exploited computer-aided systems.

Computer-aided design, experience base, data base.

© FRPC JSC 'RPA 'Mars', 2009-2018 The web-site runs on Joomla!