ISSN 1991-2927
 

ACP № 2 (56) 2019

'Automation of Control Processes' # 3 (33) 2013

Contents
AUTOMATED CONTROL SYSTEMS

Andrei Aleksandrovich Zakhariev, FRPC OJSC ‘RPA ‘Mars’, Candidate of Engineering; graduated from the Faculty of Mathematical Support of C2 Systems at Leningrad Naval Maritime Radio-Electronics Academy named after A. Popov; a leading staff scientist at FRPC OJSC ‘RPA ‘Mars’; an author of articles in the field of dataware, special mathematical and software support of C2 Systems [e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it. ]A. Zakhariev,

Oleg Nikolaevich Kudelin, FRPC OJSC ‘RPA ‘Mars’, Candidate of Physics and Mathematics, graduated from the Faculty of Physics and Engineering at Ulyanovsk State University; a deputy chief designer [e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it. ]O. Kudelin,

Evgenii Serafimovich Kukin, FRPC OJSC ‘RPA ‘Mars’, Candidate of Engineering; Associate Professor; graduated from the Faculty of Physics of Voronezh State University; Deputy chief designer, a head of a department at FRPC OJSC ‘RPA ‘Mars’; an author of articles in the field of software for computer-aided control systems. [e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it. ]E. Kukin

Construction of Aggregated Models for State and Applicability of Complex Data Objects According to Its Purpose 33_1.pdf

The article offers a sufficiently universal approach to the construction of aggregated models for complex data objects state, based on the introduction of concept of object state aggregated requirements. The construction of such models in C2 systems provides persons taking decisions with aggregated (high quality) estimations of object state or possibility to use objects in accordance with the situation conditions.

Computer-aided control systems, aggregated model, data entity, parameter values.

Aleksandr Kupriianovich Ivanov, FRPC OJSC ‘RPA ‘Mars’, [e-mail: mars@mv.ru]A. Ivanov

Operational Analysis of Real-time Hierarchic C2 Systems 33_2.pdf

Differential and algebraic equation systems specifying the states of objects in steady-state and unsteady-state conditions of situation coverage and control were composed for objects of each level of the hierarchic computer-aided control system (C2 system). Solutions of the algebraic equation systems were received. A possibility for solution of differential equation systems was shown. The equation systems for the joint execution of the situation coverage and control processes of the objects were estimated.

Hierarchic c2 system, waiting theory, information density, processing performance, differential equation system, algebraic equation system.

Iurii Petrovich Egorov, FRPC OJSC ‘RPA ‘Mars’, Doctor of Engineering, Professor; graduated from the Faculty of Radio-Engineering at Leningrad Higher Maritime School of Engineering named after Admiral Makarov; a chief staff scientist at FRPC OJSC ‘RPA ‘Mars’; specializes in the field of macro-design of large-scale information-management systems; has monographs, articles, and patents in the field of design of computer-aided C2 systems. [e-mail: yupe@mail.ru]I. Egorov,

Anatolii Ivanovich Piatakov, FRPC OJSC ‘RPA ‘Mars’, Candidate of Engineering, graduated from Military Communications Academy named after S. Budenny; finished his post-graduate study at the same academy; a chief specialist at FRPC OJSC ‘RPA ‘Mars’; specializes in the field of organization and construction of the discrete-message transmission systems; an author of articles in the field of reliability of automated facilities and data transmission. [e-mail: ]A. Piatakov,

Ilia Vasilevich Chernyshev, Ulyanovsk State Technical University, Candidate of Military Sciences; graduated from Novosibirsk Electrotechnical Institute of Communications; finished his post-graduate study at the Military Communications Academy named after S. Budenny; Ulyanovsk State Technical University; Associate Professor at the Department of Economics and Management from the Faculty of Economics and Mathematics at Ulyanovsk State Technical University; an author of text-books and articles in the field of development and modelling of computer-aided control systems. [e-mail: chernyshev@ulstu.ru]I. Chernyshev

Evaluation of the Influence of Compulsory Checking on Hardware-and-software Complex Reliability of Computer-aided Control System 33_3.pdf

The article deals with a method of a reliability improvement of a hardware and software complex for a computer-aided control system which is based on the float-time usage. The paper illustrates that the float time resulting from the functional service of the hardware and software complex may be used for a compulsory checking of the complex operation. A model of complex functioning with the float time is given. Basic ideas of the compulsory checking, its parameters and its influence on complex reliability indexes are evaluated.

Reliability of hardware and software complex, float time, compulsory checking, reliability indexes.

MATHEMATICAL MODELING

Konstantin Konstantinovich Vasiliev, Ulyanovsk State Technical University, Doctor of Engineering, Professor; Honoured Worker in the science and engineering of the Russian Federation; a correspondent member of Tatarstan Academy of Sciences; graduated from the Faculty of Radioengineering at Leningrad Institute of Electrical Engineering named after V. Ulyanov; completed his post-graduate studies at the same Leningrad Institute; a head of the Department of Telecommunications at Ulyanovsk State Technical University; author of monographs, textbooks, and articles in the field of statistic synthesis and analysis of information systems. [e-mail: vkk@ulstu.ru]K. Vasiliev,

Dmitrii Aleksandrovich Gurman, Ulyanovsk State Technical University, Post-graduate Student at the Department of Telecommunications at Ulyanovsk State Technical University, graduated from the Faculty of Radioengineering of Ulyanovsk State Technical University; author of articles in the field of control of maritime mobile objects. [e-mail: dgurman@mail.ru]D. Gurman

Modelling of Navigation and Control Algorithms for Autonomous Unmanned Underwater Vehicle 33_4.pdf

The article deals with mathematical models of autonomous unmanned underwater vehicle (AUUV) movement in a base three-dimensional coordinate system, and also with algorithms of the optimal control and AUUV movement parameters estimation. An accuracy research of the estimation algorithms for AUUV location is undertaken. An analysis of the algorithm efficiency for the AUUV optimal control in the base 3-D coordinates is submitted.

Modelling, optimal control, optimal estimation, autonomous unmanned underwater vehicle (auuv).

Valerii Vladimirovich Kozhevnikov, Ulyanovsk State University, Candidate of Engineering; graduated from Pushkin Higher Command School of Radio-Electronics; Associate Professor at the Department of Telecommunications Technology and Networks of Ulyanovsk State University; an author of articles in the field of microelectronic system design. [e-mail: vvk2861955@mail.ru]V. Kozhevnikov

The Accessibility-analysis Method of Inhibitory Petri Nets 33_5.pdf

The paper presents the research findings for the problem solving of the accessibility analysis of inhibitory Petri nets. The method is based on the orthogonal characteristic of the network. The method makes it possible to analyze both conventional and inhibitory Petri nets

Method, analysis, logic, inhibitory petri nets, an equation of state.

Iurii Sergeevich Petrov, North–Caucasian Institute of Mining and Metallurgical Engineering at Vladikavkaz State Technological University, [e-mail: kafedra–toe@skgmi–gtu.ru]I. Petrov,

Iurii Vladimirovich Sakhanskii, North–Caucasian Institute of Mining and Metallurgical Engineering at Vladikavkaz State Technological University, [e-mail: 749951@rambler.ru]I. Sakhanskii

A Mathematical Model of the Electric-blasting System As a Connection of Line With Distributed Parameters and the Chain Ladder 33_7.pdf

A theoretical basis and a calculation procedure of electrical blasting circuits represented by the line with distributed parameters and a chain ladder are given. Valid parameters of a concentrated leak resistance are specified. Practical recommendations for the improvement of the electric-blasting safety and reliability are presented on the base of calculations.

Line with distributed parameters, chain ladder, finite-difference technique, electric blasting, electric blasting cap.

Anatoly Afanasyevich Gladkikh, Ulyanovsk State Technical University, Candidate of Engineering; graduated from the S.M. Budyonny Military Communication Academy; finished his post-graduate studies at the same Academy; an doctoral student at Ulyanovsk State Technical University; Professor at the Department of the Telecommunication at Ulyanovsk State Technical University; an author of a monograph, text-books, research papers, and patents in the field of noise-immune coding and information security. [e-mail: a.gladkikh@ulstu.ru]A. Gladkikh,

Nikolai Iurevich Chilikhin, Ulyanovsk State Technical University, Post-graduate student at the Department of Telecommunication of Ulyanovsk State Technical University, graduated from Ulyanovsk State Technical University; an author of publications in the field of redundant code soft-decision decoding. [e-mail: leavrorle@gmail.com]N. Chilikhin

The Formation of Relaxed Solutions in the System of the Broadband Channel With Qpsk–qam 33_11.pdf

A relevant problem of a soft-decision indexes (SDI) forming for non-binary codes consisted in the signal sets under its processing at the non-stationary channel output is settled. On the one hand, the increasing of positions in such sets leads to the system data rate rise, but on the other hand, it reduces the Euclidean distance between the points of signal constellation. Such contradiction is resolved by choosing a reasonable modulation rate in combination with the means of transmitter error-correction coding and soft code pattern decoding by the receiver with SDI.

Ofdm, erasure channel, soft decoder, iterative process, ofdm.

Sergei Aleksandrovich Driagin, Federal Research-and-Production Center “Open Joint-Stock Company Research-and-Production Association “Mars”, Post-graduate student at Ulyanovsk State University, graduated from the Faculty of Aircraft Engineering at Ulyanovsk State Technical University, a software engineer at Federal Research-and-Production Center “Open Joint-Stock Company Research-and-Production Association “Mars”, an author of articles in the field of information technologies. [e-mail: s_drg@mail.ru]S. Driagin

A Model Providing the Guaranteed Network Bandwidth 33_12.pdf

The article deals with a method of an effective distribution of a bandwidth, taking into account the types of data traffic and bandwidth requirements. A model of adaptive reservation, based on the forecasting of traffic density is proposed.

Traffic management mechanism, network traffic, quality of service (qos).

Valerii Pavlovich Kiselevich, Concern ‘Morinformsystem-Agat’ JSC, in Moscow, Candidate of Chemistry; graduated from the Faculty of Instrument engineering at Leningrad Institute of Aircraft Instrumentation; Deputy General Director on Production -Technical Director at Concern ‘Morinformsystem-Agat’ JSC, in Moscow; an author of articles and patents in the field of quality assurance and inspection of electronic devices. [e-mail: kiselevich_vp@concern-agat.ru]V. Kiselevich,

Valentin Mikhailovich Konstantinovskii, Concern ‘Morinformsystem-Agat’ JSC, in Moscow, Doctor of Engineering; graduated from the Faculty of Automatics and Telemechanics at Ryazan Institute of Radioengineering; Chief staff scientist at Concern ‘Morinformsystem-Agat’ JSC, in Moscow; an author of articles, patents, and monographs in the field of creation of special computer facilities. [e-mail: konstantinovskiy_vm@concern-agat.ru]V. Konstantinovskii,

Sergei Igorevich Tunik, Concern ‘Morinformsystem-Agat’ JSC, Deputy head of a department at Concern ‘Morinformsystem-Agat’ JSC; graduated from the Faculty of Radioengineering at Bauman Moscow State Technical University; author of articles and patents for storage devices. [e-mail: tunik_si@concern-agat.ru]S. Tunik

Estimation Method of Electronic Unit Parametric Realiability 33_13.pdf

The quality assurance of critical electronic units in the conditions of single and irregular release requires a specific approach to a production process monitoring structure. This approach works in practice through a system of sequential monitoring operations. The practical method for determination of the electronic module parametric reliability suggested in the present article is the last operation in this system.

Parametric reliability, safe operating area, boundary of working capacity range, test.

Aleksandr Vasilevich Rechkalov, GMCS Company, Doctor of Engineering, Professor at the Department of Computer-aided control systems of Ufa State Aviation Technical University; graduated from Tiumen Institute of Industry; Business Development Director of GMCS Company; an author of articles in the field of automated information data systems. [e-mail: arechkalov@gmcs.ru]A. Rechkalov,

Tamara Kamilevna Gindullina, Ufa State Aviation Technical University, Candidate of Engineering, Associate Professor at the Department of Computer-aided control systems of Ufa State Aviation Technical University; graduated from the Faculty of Informatics and Robotics at Ufa Aviation Institute; an author of articles in the field of enterprise-management automation. [e-mail: tamara_ ugatu@mail.ru]T. Gindullina,

Oksana Rimovna Dautova, Ufa State Aviation Technical University, Post-graduate student at the Department of Computer-aided control systems of Ufa State Aviation Technical University; graduated from the Faculty of Informatics and Robotics at Ufa State Aviation Technical University; an author of articles in the field of computer-aided control systems. [e-mail: dautovaor@mail.ru]O. Dautova,

Marina Sergeevna Demchenko, Ufa State Aviation Technical University, Lecturer at the Department of Computer-aided control systems of Ufa State Aviation Technical University; graduated from the Faculty of Informatics and Robotics at Ufa State Aviation Technical University; an author of articles in the field of control automation of foundry production scheduling system. [e-mail: demchenkoms@mail.ru]M. Demchenko,

Leonid Igorevich Makarovskii, GMCS Company, Senior adviser at GMCS Company; graduated from the Faculty of General Applied Physics at Moscow Institute of Physics and Technology; specializes in the field of implementation of the enterprise-management automation and advanced planning and scheduling systems. [e-mail: lmakarovsky@gmcs.ru]L. Makarovskii

Optimization Model for Dynamic Scheduling Process of Titanium Moulding 33_14.pdf

The article deals with problems of the current approach to planning and scheduling in the foundry production. The analysis of disadvantages of the production scheduling principles laying the foundation of ERP is given. A mathematical tool is designed to optimize the operational production planning. A brief setting description of the optimization plan generated in the Enterprise Optimizer is presented. A graphical representation of a prototype of titanium casting model and its testing is shown.

Erp, erp, optimization, production scheduling, foundry production.

ARTIFICIAL INTELLIGENCE

Irina Aleksandrovna Timina, Ulyanovsk State Technical University, Post-graduate student at the Department of Information systems at Ulyanovsk State Technical University; graduated from the Faculty of Information Systems and Technology at Ulyanovsk State Technical University with the speciality in Applied Information Science (in Economics); an author of articles and research papers in the field of data mining. [e-mail: timina_i@mail.ru]I. Timina

Fuzzy Dependency As a Problem-solving Method for Time-series Mining 33_6.pdf

The article is concerned with a fuzzy time-series dependency analysis intended for the problem solving of modelling and forecasting of the economic-units behaviour. The problem solving is based on the application of a linear regression model, on the degree of similarity between the time series and their correlation. In order to forecast the value of Fuzzy Time Series, a method of fuzzy elementary tendencies is used. The proposed approach has been examined experimentally.

Fuzzy time series, forecasting, fuzzy tendency.

Aleksei Aleksandrovich Filippov, Ulyanovsk State Technical University, an assistant lecturer at the Department of Information Systems at Ulyanovsk State Technical University; graduated from the Faculty of Information Systems and Technologies at Ulyanovsk State Technical University; an author of articles in the field of intelligence data storage and processing systems. [e-mail: al.filippov@ulstu.ru]A. Filippov

Navigation Structure-building of an Electronic Archive for Technical Documentation on the Basis of Ontological Models 33_9.pdf

The article contains a description of a formation process of an electronic technical documentation archive navigation structure on the basis of ontological models. A preliminary document indexing is made in order to receive ontological concepts. The domain ontology is represented in the form of RDF-triples "object-subject-predicate". The electronic technical documentation archive structuring and the formation of its navigation structure are executed in order to find a set of the technical documentation semantically similar to a certain document which is appealing to the designer.

Intelligence system, structuring, ontology, navigation structure, electronic archive, technical documentation.

COMPUTER-AIDED ENGINEERING

Vladimir Anatolievich Maklaev, Federal Research-and-Production Center Open Joint-Stock Company ‘Research-and-Production Association ‘Mars’, Candidate of Engineering, graduated from the Faculty of Radio-Engineering at Ulyanovsk State Technical University; Director General of the Federal Research-and-Production Center Open Joint-Stock Company ‘Research-and-Production Association ‘Mars’; an author of articles in the field of CAD. [e-mail: mars@mv.ru]V. Maklaev,

Aleksandr Nikolaevich Podobrii, FRPC OJSC ‘RPA ‘Mars’, Post-graduate Student at Ulyanovsk State Technical University; graduated from the Faculty of Mechanics and Mathematics at Ulyanovsk State University; a lead programmer at FRPC OJSC ‘RPA ‘Mars’; specializes in the field of the implementation of a computer-aided system for company management. [e-mail: mars@mv.ru]A. Podobrii,

Petr Ivanovich Sosnin, Ulyanovsk State Technical University, Honoured worker of the High School of the Russian Federation, Doctor of Engineering, Professor; graduated from the Faculty of Radio-Engineering at Ulyanovsk Polytechnical Institute; a head of the Department of Computer Engineering at the Ulyanovsk State Technical University; an author of numerous papers in the field of the conceptual design of computer-aided systems. [e-mail: sosnin@ulstu.ru]P. Sosnin

On Approach to Integration of Information Resources When Designing a Family of Computer-aided Systems 33_8.pdf

The article presents an approach to an information space creation which binds together the design engineering technologies and the software design within the development of computer-aided systems families. The peculiarity of the approach is defined by a uniform integration of the information resources based on data glossary-directories.

Web-оболочка, computer-aided system families, data glossary-directory, information resource, web-shell, technological environments.

Denis Aleksandrovich Evsevichev, Ulyanovsk State Technical University, Post-graduate Student at Ulyanovsk State Technical University; graduated from Ulyanovsk State Technical University with the speciality in Electronic Instrumentation Design and Technology; an author of articles in the field of optoelectronic and circuitry engineering; has certificate of registration of software in the same field of research. [e-mail: denistk_87@mail.ru]D. Evsevichev,

Oksana Vadimovna Maksimova, Ulyanovsk State Technical University, Candidate of Engineering, graduated from Ulyanovsk State Technical University with the speciality in Electronic Instrumentation Design and Technology; Associate Professor at the Department of Electronic Instrumentation Design and Technology of Ulyanovsk State Technical University; an author of articles and monographs in the field of optoelectronic and microwave engineering. [e-mail: first32007@yandex.ru]O. Maksimova,

Mikhail Konstantinovich Samokhvalov, Ulyanovsk State Technical University, Doctor of Physics and Mathematics, Professor; graduated from Saratov State University with the speciality in Semiconductors and Dielectrics; a head of the Department of Electronic Instrumentation Design and Technology at Ulyanovsk State Technical University; an author of articles and monographs in the field of optoelectronics. [e-mail: sam@ulstu.ru]M. Samokhvalov

A Solution of Computer-aided Design of the Thin-film Electroluminescent Indicators 33_10.pdf

A development and a solution of designing problems of the advanced thin-film electroluminescent (TFEL) display devices is an important undertaking in the engineering field. The development and optimization of the TFEL display design is a complex task and requires a considerable work of the engineer. The solution of this problem can be accomplished by the use of automation means. Therefore, the development of the TFEL indicator design algorithm and calculation program is essential.

Thin films, electroluminescence, display, design.

© FRPC JSC 'RPA 'Mars', 2009-2018 The web-site runs on Joomla!