ISSN 1991-2927
 

ACP № 2 (56) 2019

Author: "Iulia Aleksandrovna Radionova"

Aleksei Arkadevich Smagin, Ulyanovsk State University, Doctor of Science in Engineering, Professor; graduated from the Faculty of Radioengineering of Ulyanovsk Polytechnic Institute; Head of the Department of Telecommunication Technologies and Networks of Ulyanovsk State University; an author of articles, inventions, and monographs in the field of information system development of different purposes. [e-mail: smaginaa1@mail.ru]A. Smagin,

Iulia Aleksandrovna Radionova, Federal Research-and-Production Center Joint Stock Company ‘Research-and-Production Association ‘Mars’, Candidate of Science in Engineering; graduated from the Faculty of Mathematics and Mechanics of Ulyanovsk State University; finished her postgraduate study at Ulyanovsk State Technical University; Lead Programming Engineer at FRPC JSC ‘RPA ‘Mars’; an author of articles in the field of automated workflow systems, intelligent technical documentation storages, and statistical analysis of supplier appraisal. [e-mail: julia-owl@mail.ru]I. Radionova,

Sergei Aleksandrovich Karpaev, Federal Research-and-Production Center Joint Stock Company ‘Research-and-Production Association ‘Mars’, Postgraduate Student; graduated from Ulyanovsk State Technical University; Production Control System Engineer at FRPC JSC ‘RPA ‘Mars’; an author of articles in the field of the business software automation and short-term production planning. [e-mail: neonix3000@mail.ru]S. Karpaev

Operating-resource Model of Technological Operations Distribution Based on the Implementation Means 55_10.pdf

The article is devoted to the actual topic of designing route maps. At the heart of the route maps, the route for performing technological operations at the production site is laid. In the production process, production is often stopped due to imperfections in the route map, one of the reasons for which is the change of resources.In the article it is proposed to carry out the design of the technological route according to the proposed principles with the use of a two-pass two-component model as an increase in the productivity of the production process. The methodology is based on the principle of selecting the means for implementing technological operations on the basis of two interacting models, which make it possible to cover the process more fully from the point of view of resource provision and the performance of a technological operation using the example of chemical production.The proposed model allows the designer to choose the route of the technological process from the set of proposed options. An algorithm for designing and implementing a model in automated systems is presented.The offered algorithms allow to form design decisions, it gives the chance of their use for the subsequent processing and definition of efficiency.Formed by different criteria, technological routes provide many variants of the solutions obtained. The offered provides efficiency of improvement of quality of technological processes due to use of means of information support of maintenance of a set of operations close to an optimum choice of technical means of realization.

Algorithm for designing design solutions, tool support, mathematical model, design methodology, operational- resource model, design of route maps of technological processes, technological processes, chemical production.

2019_ 1

Sections: Mathematical modeling

Subjects: Mathematical modeling.



Iuliia Aleksandrovna Radionova, FRPC JSC ‘RPA ‘Mars’, Candidate of Science in Engineering; graduated from the Faculty of Mathematics and Mechanics of Ulyanovsk State University; finished her postgraduate study at Ulyanovsk State Technical University; Lead Software Engineer at FRPC JSC ‘RPA ‘Mars’; an author of articles in the field of automated workflow systems, intelligent technical documentation storages, and statistical analysis of supplier appraisal. [e-mail: julia-owl@mail.ru]I. Radionova,

Aleksandr Alekseevich Emelianov, FRPC JSC ‘RPA ‘Mars’, Candidate of Science in Engineering; graduated from F.E. Dzerzhinsky Military Academy; Chief Specialist of FRPC JSC ‘RPA ‘Mars’; an author of publications in the field of the quality management and information security systems creation, statistical analysis of supplier appraisal. [e-mail: mars@mv.ru]A. Emelianov,

Aleksandr Leonodovich Savkin, FRPC JSC ‘RPA ‘Mars’, Candidate of Military Sciences, Associate Professor; graduated from the Ulyanovsk Higher Military Command School of Communications, the Marshal Budjonny Military Academy of Signal Corps; completed postgraduate studies in the Military Academy of Communications; Head of Science and Engineering Support Department of FRPC JSC ‘RPA ‘Mars’; an author of scientific works, textbooks, and articles in the field of development and modelling of communication control systems and statistical analysis of supplier appraisal. [e-mail: mars@mv.ru]A. Savkin

Application of Statistical Data in a Dynamic Model of Software Reliability Evaluation 54_5.pdf

Authors consider an issue of software reliability evaluation, general definitions and reliability performances as well as the existing models of reliability evaluation. The parameters of existing models have been analyzed. A model best applying for evaluating the software reliability under conditions of operational testing has been chosen. A modification of the chosen model has been developed, which takes into account the complexity of software, the work distribution while software developing, the qualification of implementers, the distinction between the complexity and importance of errors detected while testing. A database structure has been developed for storage information on experimental findings. A software implementation of initial and modified models has been carried out. A plan of experiments has been designed. A testing simulation with various combinations of initial data has been implemented. Errors of model operation have been analyzed and compared. On the base of the implemented analyze, a conclusion on a higher effectiveness of the software reliability evaluation implemented by the use of the modified model has been provided. A concept of the performance factor of an implementer has been introduced, the dynamics of this factor has been analyzed based on statistical data obtained. The analysis proved the validity of the concept determination in the model developed. The conclusion on the possibility of implementing the additional functional for software reliability evaluating with separation to modules as well as of making the recommendations on the tasks assigned to implementer after the carried-out analysis of detected errors has been drawn.

Software reliability, model of reliability evaluation, testing, effectiveness.

2018_ 4

Sections: Information systems

Subjects: Information systems.


Aleksandr Alekseevich Emelianov, Federal Research-and-Production Center Joint Stock Company ‘Research-and-Production Association ‘Mars’, Candidate of Engineering; graduated from F.E. Dzerzginsky Military Academy; Deputy Chief Engineer for Quality Assurance and Engineering Support - Head of the Management Department of Federal Research-and-Production Center Joint Stock Company ‘Research-and-Production Association ‘Mars’; an author of publications in the field of constructing the quality management and information security systems. [e-mail: mars@mv.ru]A. Emelianov,

Iulia Aleksandrovna Radionova, Federal Research-and-Production Center Joint Stock Company ‘Research-and-Production Association ‘Mars’, Candidate of Engineering; graduated from the Faculty of Mathematics and Mechanics of Ulyanovsk State University, finished her postgraduate studies at Ulyanovsk State Technical University; Lead Programming Engineer at FRPC JSC ‘RPA ‘Mars’; an author of articles in the field of automated workflow systems, intelligent technical documentation storages. [e-mail: julia-owl@mail.ru]I. Radionova,

Aleksandr Leonidovich Savkin, Federal Research-and-Production Center Joint Stock Company ‘Research-and-Production Association ‘Mars’, Candidate of Military Sciences, Associate Professor; graduated from Ulyanovsk High Education Military Communications Academy and the Marshal Budjonny Military Academy of Signal Corps; finished his postgraduate studies at the same Academy; Head of the Department of Scientific-and-Technical Activity Providing of Federal Research-and-Production Center Joint Stock Company ‘Research-and-Production Association ‘Mars’; an author of papers, textbooks in the field of development and modelling of communication control systems. [e-mail: mars@mv.ru]A. Savkin

Simulation and Statistical Control of Procurement Risks 000_7.pdf

In order to optimize the acceptance control, a supplement to the statistical method of control - the dynamic characteristic of a supplier [1], was developed at the enterprise. On the basis of some supplier’s parameters and the products schedule line, a coefficient allowing to decrease a controllable sample size is composed. The article describes structure of the database developed on the basis of the method of supply statistical control and the dynamic characteristic calculation. The database allows to store statistical data about products supplies and calculation data for simulation of acceptance control. Schemes of relations between database entities and a scheme of the dynamic characteristic calculation are demonstrated in the article. A brief description of the developed software interface is considered. The software realizes the following functions: registration, data review and analysis, calculation of suppliers’ quality indices, data calculation for simulation of control.

statistical control, supplier evaluation, dynamic characteristic, evaluation specifications, simulation, database,softwar.

2017_ 2

Sections: Information systems

Subjects: Information systems, Mathematical modeling.


Aleksandr Alekseevich Emelianov, Federal Research-and-Production Center Joint Stock Company ‘Research-and-Production Association ‘Mars’, Candidate of Engineering; graduated from F.E. Dzerzginsky Military Academy; Deputy Chief Engineer for Quality Assurance and Engineering Support - Head of the Management Department of Federal Research-and-Production Center Joint Stock Company ‘Research-and-Production Association ‘Mars’; an author of publications in the field of constructing the quality management and information security systems [e-mail: mars@mv.ru]A. Emelianov,

Iulia Aleksandrovna Radionova, Federal Research-and-Production Center Joint Stock Company ‘Research-and-Production Association ‘Mars’, Candidate of Engineering; graduated from the Faculty of Mathematics and Mechanics of Ulyanovsk State University, finished her postgraduate studies at Ulyanovsk State Technical University; Lead Programming Engineer at FRPC JSC ‘RPA ‘Mars’; an author of articles in the field of automated workflow systems, intelligent technical documentation storages. [e-mail: julia-owl@mail.ru]I. Radionova,

Aleksandr Leonidovich Savkin, Federal Research-and-Production Center Joint Stock Company ‘Research-and-Production Association ‘Mars’, Candidate of Military Sciences, Associate Professor; graduated from Ulyanovsk High Education Military Communications Academy and the Marshal Budjonny Military Academy of Signal Corps; finished his postgraduate studies at the same Academy; Head of the Department of Scientific-and-Technical Activity Providing of Federal Research-and-Production Center Joint Stock Company ‘Research-and-Production Association ‘Mars’; an author papers, textbooks in the field of development and modeling of communication control systems. [e-mail: mars@mv.ru]A. Savkin

The Statistical Approach to the Assessment of Suppliers for the Large Instrument Making Enterprise 000_10.pdf

The main components of statistical acceptance inspection such as plans, types, levels, operative characteristics, risks of suppliers and customers, acceptance and reject levels of defectiveness, and also dependency between all the parameters on the basis of the mathematical statistics theory are considered. The use of acceptance statistical control of the purchasing products and components parcel, one-, two-, and three-stage control plans, methods for controlled sampling frame volume calculation, the main problems arising in case of applying the specified methods are also considered. The authors define the terms of the supplier dynamic characteristic and supplier confidence level. The authors also propose the method for constructing the supplier dynamic characteristic on the basis of capture and analysis of statistical data of incoming inspection over the previous periods. The data include the supplier parameters values, the forming quality index of the supplier, the degree of merit for the products parcel as whole and individual products. The dependency of the controlled sampling frames on the supplier dynamic characteristics is considered.

Statistical control, supplier assessment, dynamic characteristic.

2016_ 4

Sections: Information systems

Subjects: Information systems.


Aleksandr Alekseevich Emelianov, Federal Research-and-Production Center Joint Stock Company ‘Research-and-Production Association ‘Mars’, Candidate of Engineering; graduated from F.E. Dzerzginsky Military Academy; Deputy Chief Engineer for Quality Assurance and Engineering Support - Head of the Management Department of Federal Research-and-Production Center Joint Stock Company ‘Research-and-Production Association ‘Mars’; an author of publications in the field of constructing the quality management and information security systems. [e-mail: mars@mv.ru]A. Emelianov,

Iulia Aleksandrovna Radionova, Federal Research-and-Production Center Joint Stock Company ‘Research-and-Production Association ‘Mars’, Candidate of Engineering; graduated from the Faculty of Mathematics and Mechanics of Ulyanovsk State University, finished her postgraduate study at Ulyanovsk State Technical University; Lead Programming Engineer at FRPC JSC ‘RPA ‘Mars’; an author of articles in the field of automated workflow systems, intelligent technical documentation storages. [e-mail: julia-owl@mail.ru]I. Radionova

The Model for Estimating the Efficiency of Solving the Task of Risk Minimization in the Context of an Organization 000_9.pdf

Nowadays in the process of organization management, the decision-making problem under conditions of uncertainty in some functioning parameters (internal and external ones) exists. One of the main ways to solve the problem is forecasting risks appeared in functioning process, and risk management. Existence of different risk management methods allows to a head of an organization choosing the most appropriate one. The most appropriate method for a large research-and-production organization is a statistic one based on big data array numerical analysis. Such a method proposes more accurate results unaffected by experts’ subjective opinion. The article considers the simulation method for the process of risk management in the context of an organization and the statistic method of risk minimization based on the usage of mathematical statistics tools. The method allows estimating not only the risk level but also the efficiency of actions intended to risk minimization.

Risk management, statistic method, risk minimization.

2016_ 2

Sections: Mathematical modeling

Subjects: Mathematical modeling, Information systems.


Iulia Aleksandrovna Radionova, [e-mail: mars@mv.ru]Y. Radionova

System of Distribution of Rights of Access to Data of Technical- Document Archive on Basis of Use of Expert Document- Categorization 21_9.pdf

The present article deals with a system for distribution of rights of access to information in technical-document archive on basis of categorization of documents, structure and functions of corporate staff. The article is prepared using data from the e-document archive and e-filing of paper documents at the Technical-Document Department of FRPC OJSC RPA Mars.

Archive, technical documents, distribution of rights of access, electronic filing, categorization.

2010_ 3

Sections: Computer-aided design systems

Subjects: Computer-aided engineering.


Iulia Aleksandrovna Radionova, [e-mail: mars@mv.ru]Y. Radionova

Storage of Data Change History in Archives of Technical Documents 19_11.pdf

The present article deals with storage of change history on basis of information retrieval features of documents. The article is based on the structure of an archive of e-documents and the structure of an e-index of paper documents, which are implemented in the Department of Technical Documents of Federal Research-and-Production Center Open Joint-Stock Company Research-and-Production Association Mars. The article also considers three possible ways for storage of change history including description of structure of database tables for each of them.

Archive, technical documents, change history, dbms, e-index.

2010_ 1

Sections: Production technology. equipment and facilities

Subjects: Information systems.


Iulia Aleksandrovna Radionova, [e-mail: mars@mv.ru] Y. Radionova

Tools for Efficiency Evaluation of Automatic Clustering Methods. 18_14.pdf

The article deals with tools to ensure automation of expert classification processes for e-documents, comparison of results of expert classification and automatic clustering using Kohonen and FCM methods as well as creation of evaluation functions as a result of comparisons.

Application, computer-aided classification, automatic clustering evaluation, expert classification, clustering parameters.

2009_ 4

Sections: Production technology. equipment and facilities

Subjects: Computer-aided engineering.


Iulia Aleksandrovna Radionova, [e-mail: mars@mv.ru]Radionova Y.

Method of Criterion Function for Efficiency of Automatic Clustering Algorithms 15_3.pdf

The article deals with description of criterion function method providing insight into efficiency of automatic clustering to create intelligent e-document repository.

2009_ 1

Sections: Integrated c2 system: methodology for creation of systems, information technology, facilities and components

Subjects: Mathematical modeling, Automated control systems.


© FRPC JSC 'RPA 'Mars', 2009-2018 The web-site runs on Joomla!