ISSN 1991-2927
 

ACP № 1 (55) 2019

Keyword: "experience base"

Vladimir Anatolyevich Maklaev, Federal Research-and-Production Center Open Joint-Stock Company ‘Research-and-Production Association ‘Mars, Candidate of Engineering; graduated from the Radio Engineering Faculty of Ulyanovsk Polytechnic Institute; Director General at the Federal Research-and-Production Center Open Joint-Stock Company ‘Research-and-Production Association ‘Mars; an author of articles in the field of CAD. [e-mail: mars@mv.ru]V. Maklaev,

Petr Ivanovich Sosnin, Ulyanovsk State Technical University, Honored Worker of the Higher School of the Russian Federation, Doctor of Engineering, Professor; graduated from the Radio-Engineering Faculty of Ulyanovsk Polytechnic Institute; a head of the Computer Science Department at Ulyanovsk State Technical University; an author of numerous works in the field of conceptual design of computer-aided systems. [e-mail: sosnin@ulstu.ru]P. Sosnin

Question-answer Modeling of the Operational Spacein Designing the Family of Automated Systems 36_13.pdf

For last 20 years, the successfulness of developing the software intensive systems (SIS) has been associated with a very low degree of a success (approximately 35% in accordance with universally recognized statistics of Standish Croup company), and it is an important reason for searching of new approaches to occupational activity in this subject area which enough fully reflects problems of occupational activity in human-computer environments. Negative influences of human factors (misunderstanding, ambiguity of reasoning and the others) are being recognized as basic reasons of unsuccessfulness in creating and using of SISs and automated systems (AS) as a subclass of SIS, and it inevitable concerns relations of the human with the software. A very important direction of an implementation and improvement of the human-computer activity is bound with discovering, representing and evolving an occupational experience. The special role of interactions with experience in human-computer environments is confirmed by active evolving of the subject area “empirical software engineering” in the frame of which the special kind of “metrology” is developed. This subject area is also bound with the creation and use of the Experience Bases and Experience Factories and with methods and means of “experimenting” in human-computer environments. Told above includes sufficient arguments to count the creation of innovative methods and means of conceptual experimenting in human-computer environments is topical.Formalization of conceptual experimenting is implemented with using a system of rules of the generated grammar which shall include the sets of rules specifying a reflection of all components of professional work onto a question-answer memory. A program realization of the instrumentally technological environment intended for conceptual experimenting, in the form of a program product which is demanded commercially and adjusted on a definite kind of occupational activity.

Cad, conceptual experimenting, experience base, precedent, professional maturity.

2014_ 2

Sections: Computer-aided engineering

Subjects: Computer-aided engineering.


Vladimir Anatolyevich Maklaev, Federal Research-and-Production Center Open Joint-Stock Company ‘Research-and-Production Association ‘Mars, Candidate of Engineering; graduated from the Radio Engineering Faculty of Ulyanovsk Polytechnic Institute; Director General at the Federal Research-and-Production Center Open Joint-Stock Company ‘Research-and-Production Association ‘Mars; an author of articles in the field of CAD. [e-mail: mars@mv.ru]V. Maklaev

Communicative Maintenance of Designers’ Activity in Processes of Creating and Using an Experience Base 35_9.pdf

The paper presents a communicative maintenance of a designers’ activity in processes of creating and using an Experience Base of a design company that develops a family of automated systems. The experience base is intended for accumulating all kinds of company assets for their reuse in creating the next members of the family. All assets active as a typical solution is formed as a precedent’s model that opens an inclusion of the corresponding solution in the process of designing. Such models are bound with design decisions that can be useful in the subsequent development. For uniform representation of such models in the Experience Base, the typical scheme of precedents is specified. The scheme includes the statement of the corresponding task, a number of conceptual models and a pseudo-code program of the task decision Communicative maintenance serves to forming and checking the correctness of each component of each precedent’s model. The communicative maintenance is based on a set of communicative tasks the decisions of which are included in processes of designing. In a corporate network, the communicative maintenance is realized in two versions. Both versions are developed in an instrumental environment of a question-answer type. One of these versions is implemented by means of Web-programming. The corresponding toolkit provides registering of question-answer reasoning of designers solving the project tasks. Thus, specificity of communicative maintenance is defined with its orientation on precedents and the decision of communicative tasks in the specialized question-answer environment.

Cad, communication, precedent, experience base.

2014_ 1

Sections: Information systems

Subjects: Information systems.


Vladimir Anatolevich Maklaev, Federal Research-and-Production Center Open Joint-Stock Company ‘Research-and-Production Association ‘Mars’, Candidate of Engineering; graduated from the Radio-Engineering Faculty of Ulyanovsk Polytechnic Institute; Director General of the Federal Research-and-Production Center Open Joint-Stock Company ‘Research-and-Production Association ‘Mars’; an author of articles in the field of CAD. [e-mail: mars@mv.ru]V. Maklaev,

Andrei Alekseevich Pertsev, Federal Research-and-Production Center Open Joint-Stock Company ‘Research-and-Production Association ‘Mars’, an external PhD student of the Computer Science Department of Ulyanovsk State Technical University; graduated from the Mechanics and Mathematics Faculty of Ulyanovsk State University; a department chief at FRPC OJSC ‘RPA ‘Mars’; an author of articles in the field of CAD. [e-mail: mars@mv.ru]A. Pertsev,

Petr Ivanovich Sosnin, Ulyanovsk State Technical University, Honored Worker of the Higher School of the Russian Federation, Doctor of Engineering, Professor; graduated from the Radio-Engineering Faculty of Ulyanovsk Polytechnic Institute; a head of the Computer Science Department at Ulyanovsk State Technical University; an author of numerous works in the field of conceptual design of computer-aided systems. [e-mail: sosnin@ulstu.ru]P. Sosnin

An Approach to a Personalized Designer Model Generation and Use 34_8.pdf

The paper presents tools for computer-aided generation of personalized designer models in an organization developing computer-aided system families. The implementation is oriented at design processes and an experience base is used for its information service.

Computer-aided design, experience base, personal job description, professional maturity.

2013_ 4

Sections: Artificial intelligence system

Subjects: Artificial intelligence, Computer-aided engineering, Information systems.


Mikhail Yurievich Romodin, FRPC OJSC ‘RPA ‘MARS’, Post-graduate Student at the Chair ‘Computer Engineering’ of Ulyanovsk State Technical University; graduated from the Faculty of Information Systems and Technologies of Ulyanovsk State Technical University; author of articles in the field of CAD. [e-mail: romodin_mihail@mail.ru]M. Romodin,

Yury Aleksandrovich Lapshov, Ulyanovsk State Technical University, has a Master’s degree in Engineering and Technologies; graduated from Ulyanovsk State Technical University; Post-graduate Student at the Chair ‘Computer Engineering’ of Ulyanovsk State Technical University; author of articles in the field of CAD. [e-mail: y.lapshov@mail.ru]Y. Lapshov,

Petr Ivanovich Sosnin, Ulyanovsk State Technical University, Honoured Worker of the Higher School of the Russian Federation; Doctor of Engineering, Professor; graduated from the Faculty of Radioengineering of Ulyanovsk Polytechnic Institute; Head of the Chair ‘Computer Engineering’ of Ulyanovsk State Technical University; author of numerous papers in the field of conceptual design of computer-aided systems. [e-mail: sosnin@ulstu.ru]P. Sosnin

Pseudocode Programming in Conceptual Design of Data Bases 32_14.pdf

The article presents the facilities of design decision pseudocode programming in conceptual design of data bases of computer-aided systems. The proposed approach and its implementation tools are oriented at the experiment with design decision releases in the context of the exploited computer-aided systems.

Computer-aided design, experience base, data base.

2013_ 2

Sections: Software and mathematical support of computers, computer systems and networks

Subjects: Computer-aided engineering, Information systems.


Vladimir Anatolievich Maklaev, Federal Research-and-Production Center Open Joint-Stock Company Research-and-Production Association Mars, Candidate of Engineering, graduated from the Faculty of Radioengineering of Ulyanovsk Polytechnic Institute, Director General of Federal Research-and-Production Center Open Joint-Stock Company Research-and-Production Association Mars; author of articles in the field of CAD [e-mail: mars@mv.ru]V. Maklaev

Means and Mechanisms for Synchronization of Informational Resources of Project Organization Experience Base 31_9.pdf

The article presents means for synchronization of informational resources of project organization experience base which develops computer-aided system suites. Mechanisms and means for synchronization are oriented at adequate representation of directory of experience base repository and directory copies saved in informational bases of project groups.

Computer-aided design, experience base, informational support, synchronization.

2013_ 1

Sections: Computer-aided design system

Subjects: Computer-aided engineering, Information systems.


Konstantin Sergeevich Beliaev, Ulyanovsk State Technical University, Master of Engineering and Technologies; graduated from Ulyanovsk State Technical University, post-graduate student of the Computer Engineering Chair at Ulyanovsk State Technical University; author of articles in the field of CAD [e-mail: k.belyaev@ulstu.ru]K. Beliaev,

Vladimir Anatolievich Maklaev, Federal Research-and-Production Center Open Joint-Stock Company Research-and-Production Association Mars, Candidate of Engineering, graduated from the Faculty of Radioengineering of Ulyanovsk Polytechnic Institute, Director General of Federal Research-and-Production Center Open Joint-Stock Company Research-and-Production Association Mars; author of articles in the field of CAD [e-mail: mars@mv.ru]V. Maklaev

Dynamic Visualization Means for Development of Computer- Aided Systems 31_10.pdf

The article presents dynamic visualization means used in computer-aided systems development to display the amount of work of project activity, decision-making and other useful information requiring operational access to work with them.

Computer-aided design, dynamic visualization, question-and-answer system, experience base.

2013_ 1

Sections: Computer-aided design system

Subjects: Computer-aided engineering, Information systems.


Vladimir Anatolyevich Maklaev, Federal Research-and-Production Center Open Joint-Stock Company Research-and-Production Association Mars, Candidate of Engineering; graduated from the Faculty of Radioengineering of Ulyanovsk Polytechnic Institute; Director General of Federal Research-and-Production Center Open Joint-Stock Company Research-and-Production Association Mars; author of articles in the field of CAD [e-mail: mars@mv.ru]V. Maklaev

Implementation of Tools for Maintenance of Design Organization Asset Archive 30_10.pdf

The article presents design solutions gained during the development of tools for administrator and user of asset repository included into tool environment of experience base of design organization. It also describes an operations situation of administrator actions towards maintenance of design organization asset archive.

Computer-aided design, assets, experience base, repository, design solutions, components, uml diagram.

2012_ 4

Sections: Computer-aided design systems

Subjects: Computer-aided engineering, Information systems.


Vladimir Anatolyevich Maklaev, Federal Research-and-Production Center Open Joint-Stock Company Research-and-Production Association Mars, Candidate of Engineering; graduated from the Faculty of Radioengineering of Ulyanovsk Polytechnic Institute; Director General of Federal Research-and-Production Center Open Joint-Stock Company Research-and-Production Association Mars; author of articles in the field of CAD [e-mail: mars@mv.ru]V. Maklaev

Representation of Software Assets in Experience-base Repository of Design Organization 29_7.pdf

The article presents facilities to extract assets from source codes of software products in order to locate them into a designorganization experience-base repository. Utilities ensuring the asset extraction, are programmed based on a special-purpose pseudocode language. The article also presents an operational environment for designers' access to the repository.

Computer-aided design, assets, experience base, repository, pseudocode programming.

2012_ 3

Sections: Computer-aided design systems

Subjects: Computer-aided engineering.



Vladimir Anatolyevich Maklaev, Federal Research-and-Production Center Open Joint-Stock Company Research-and-Production Association Mars, Candidate of Engineering, graduated from the Faculty of Radio-Engineering at the Ulyanovsk Polytechnic Institute; Director General of Federal Research-and-Production Center Open Joint-Stock Company 'Research-and-Production Association 'Mars'; author of articles in the field of CAD. [e-mail: mars@mv.ru.]V. Maklaev

An Approach to Presentation and Operational Use of Professional Assets of Design Organization 23_1.pdf

The article presents an approach to the creation and use of design-organization experience base. An interpretation of experience base as a system of assets generated and re-used for the design of special-purpose computer-aided system family, is specific to the approach. The interpretation of assets and specialization of the family contributes to the use of the richest potential of system-family standartization, capability maturity, life cycle, architecture descriptions and other standards for experience-base design. Tools of question-and-answer conceptual design enabling the integration of all the useful things from heterogeneous standards and other useful sources of analogies, are selected to create the experience base.

Design of computer-aided systems, experience base, question-and-answer system, design document.

2011_ 1

Sections: Computer-aided design systems

Subjects: Artificial intelligence, Computer-aided engineering.


© FRPC JSC 'RPA 'Mars', 2009-2018 The web-site runs on Joomla!