ISSN 1991-2927
 

ACP № 2 (56) 2019

Keyword: "Software"

Aleksandr Alekseevich Emelianov, Federal Research-and-Production Center Joint Stock Company ‘Research-and-Production Association ‘Mars’, Candidate of Engineering; graduated from F.E. Dzerzhinsky Military Academy; Deputy Chief Engineer for Quality Assurance and Engineering Support - Head of the Management Department of Federal Research-and-Production Center Joint Stock Company ‘Research-and-Production Association ‘Mars’; an author of publications in the field of creation of the quality management and information security systems, statistical analysis of supplier appraisal. [e-mail: mars@mv.ru]A. Emelianov,

Iuliia Aleksandrovna Radionova, Federal Research-and-Production Center Joint Stock Company ‘Research-and-Production Association ‘Mars’, Candidate of Engineering; graduated from the Faculty of Mathematics and Mechanics of Ulyanovsk State University; finished her postgraduate study at Ulyanovsk State Technical University; Lead Software Engineer at FRPC JSC ‘RPA ‘Mars’; an author of articles in the field of automated workflow systems, intelligent technical documentation storages, and statistical analysis of supplier appraisal. [e-mail: julia-owl@mail.ru]I. Radionova,

Aleksandr Leonidovich Savkin, Federal Research-and-Production Center Joint Stock Company ‘Research-and-Production Association ‘Mars’, Candidate of Military Sciences, Associate Professor; graduated from Ulyanovsk Higher Military Command School of Communications, Marshal Budjonny Military Academy of Signal Corps, completed postgraduate studies in the Military Academy of Communications; Head of Science and Engineering Support Department of FRPC JSC ‘RPA ‘Mars’; an author of scientific works, textbooks, and articles in the field of development and modelling of communication control systems and statistical analysis of supplier appraisal. [e-mail: mars@mv.ru]A. Savkin

Information and Analytical Model of Product Testing for Counterfeit 52_4.pdf

The article considers a problem of counterfeit products and the existing methods for solving this problem. An information and analytical method for the optimization of an expert product evaluation is proposed, which uses a parameter set and allows to automate the final decision-making process. The set of parameters takes into account not only indicators for suppliers, but also possible consequences of using counterfeit products for different groups of consumers. The method is based on the application of a neural network using a certain base of expert knowledge. Network training is provided during analyzing process with the possibility of correction by an expert. Modeling of the analysis process with different sets of input parameters and various parameters of the neural network was carried out. The results are stored in the database; the neural network performance is evaluated based on these results. The database structure, input parameters structure and the visualization of experimental results are presented.

Counterfeit, modeling, evaluation parameter, database, software, neural network.

2018_ 2

Sections: Information systems

Subjects: Information systems.


Denis Konstantinovich Eltyshev, Perm National Research Polytechnic University, Candidate of Engineering; graduated from the Faculty of Electrical Engineering of Perm State Technical University; Associate Professor of the Department of Microprocessor Automation Means of Perm National Research Polytechnic University, Vice-Dean for research activity of students of the Faculty of Electrical Engineering; an author of articles in the field of expert system development and decision support systems in the operation of power equipment. [e-mail: eltyshev@msa.pstu.ru]D. Eltyshev,

Evgenii Nikolaevich Ershov, Perm National Research Polytechnic University, a bachelor; graduated from the Faculty of Electrical Engineering of Perm State Technical University; a candidate for a master's degree at the Department of Microprocessor Automation Means of Perm National Research Polytechnic University; specializes in the field of software and hardware solutions for automation and control of power facilities. [e-mail: evgeni29397@yandex.ru]E. Ershov

Automation of Creating and Testing the Software for a Multiphase Pump Units Control Station 51_4.pdf

The article deals with problems of a multi-purpose stand for creating and debugging the software used to control multiphase screw pumps at oil and gas production facilities. A development concept is focused on total customization, on the reduction of costs related to designing and manufacturing the controls for pumping units having an advanced functionality in comparison with analogues as well as on the equipment reliability improvement. A stand architecture is proposed, hardware oriented to import substitution is selected, visual design of the operator control panel is created, which provides remote control of the pumping unit operation. An algorithm for control and protection of an electric motor drive of a multiphase screw pump is developed, stand operations testing is performed. An algorithm for equipment control in the mode of imitation of signals from sensors that monitor its key parameters with archiving and analyzing data received is validated. The use of stand will allow us to develop and test the software quickly when creating our own multiphase pump control stations as well as to train technical personnel.

Multiphase screw pumps, test automation, control, electric motor drive, software.

2018_ 1

Sections: Information systems

Subjects: Information systems.


Aleksandr Alekseevich Emelianov, Federal Research-and-Production Center Joint Stock Company ‘Research-and-Production Association ‘Mars’, Candidate of Engineering; graduated from F.E. Dzerzginsky Military Academy; Deputy Chief Engineer for Quality Assurance and Engineering Support - Head of the Management Department of Federal Research-and-Production Center Joint Stock Company ‘Research-and-Production Association ‘Mars’; an author of publications in the field of constructing the quality management and information security systems. [e-mail: mars@mv.ru]A. Emelianov,

Iulia Aleksandrovna Radionova, Federal Research-and-Production Center Joint Stock Company ‘Research-and-Production Association ‘Mars’, Candidate of Engineering; graduated from the Faculty of Mathematics and Mechanics of Ulyanovsk State University, finished her postgraduate studies at Ulyanovsk State Technical University; Lead Programming Engineer at FRPC JSC ‘RPA ‘Mars’; an author of articles in the field of automated workflow systems, intelligent technical documentation storages. [e-mail: julia-owl@mail.ru]I. Radionova,

Aleksandr Leonidovich Savkin, Federal Research-and-Production Center Joint Stock Company ‘Research-and-Production Association ‘Mars’, Candidate of Military Sciences, Associate Professor; graduated from Ulyanovsk High Education Military Communications Academy and the Marshal Budjonny Military Academy of Signal Corps; finished his postgraduate studies at the same Academy; Head of the Department of Scientific-and-Technical Activity Providing of Federal Research-and-Production Center Joint Stock Company ‘Research-and-Production Association ‘Mars’; an author of papers, textbooks in the field of development and modelling of communication control systems. [e-mail: mars@mv.ru]A. Savkin

Simulation and Statistical Control of Procurement Risks 000_7.pdf

In order to optimize the acceptance control, a supplement to the statistical method of control - the dynamic characteristic of a supplier [1], was developed at the enterprise. On the basis of some supplier’s parameters and the products schedule line, a coefficient allowing to decrease a controllable sample size is composed. The article describes structure of the database developed on the basis of the method of supply statistical control and the dynamic characteristic calculation. The database allows to store statistical data about products supplies and calculation data for simulation of acceptance control. Schemes of relations between database entities and a scheme of the dynamic characteristic calculation are demonstrated in the article. A brief description of the developed software interface is considered. The software realizes the following functions: registration, data review and analysis, calculation of suppliers’ quality indices, data calculation for simulation of control.

statistical control, supplier evaluation, dynamic characteristic, evaluation specifications, simulation, database,softwar.

2017_ 2

Sections: Information systems

Subjects: Information systems, Mathematical modeling.


Denis Sergeevich Soloviev, Tambov State Technical University, graduated from the Faculty of Information Technology of Tambov State Technical University; Post-graduate Student at the Deartment of CAD Systems; author of articles, brief outline reports, and state registration certificates of computer programs in the field of mathematical modeling and optimal control for galvanic processes with a cyclic switching-on of anode sections. [e-mail: solovjevdenis@mail.ru]D. Soloviev,

Yuri Vladimirovich Litovka, Tambov State Technical University, Doctor of Engineering, Professor; graduated from the Faculty of Automation of chemical production at Tambov Institute of Chemical Engineering, Professor at the Deartment of CAD Systems; author of articles, brief outline reports, and patents in the field of mathematical modeling, optimal control of technological processes in galvanotechnics, and CAD systems development. [e-mail: polycmem@list.ru]Y. Litovka

Software Solution for Control Automation of Galvanic Processes With a Cyclic Switching-on of Anode Sections 32_6.pdf

This article presents the mathematical problem formulation of optimal control by galvanic processes with a cyclic switching-on of anode sections. The structure of automated control system for technological processes is proposed for problem solving. The main types of control system software are described. Automated search stages of optimal control in system software implementation are considered in a specific context.

Software, automated control system for technological process, galvanic process with a cyclic switching-on of anode sections.

2013_ 2

Sections: Mathematical modeling, calculi of approximations and software systems

Subjects: Information systems, Automated control systems, Mathematical modeling.


Petr Ivanovich Sosnin, Ulyanovsk State Technical University, honored worker of the Higher School of the Russian Federation; Doctor of Engineering, Professor; graduated from the Faculty of Radioengineering of Ulyanovsk Polytechnic Institute; head of the Chair Computer Engineering at Ulyanovsk State Technical University; author of numerous papers in the field of conceptual design of computer-aided systems [e-mail: sosnin@ulstu.ru]P. Sosnin,

Yury Alexanderovich Lapshov, Ulyanovsk State Technical University, has a Masters degree in Engineering and Technologies; graduated from Ulyanovsk State Technical University; post-graduate student at the Chair Computer Engineering of Ulyanovsk State Technical University; author of articles in the field of CAD [e-mail: y.lapshov@mail.ru]Y. Lapshov,

Vladimir Anatolyevich Maklaev, Federal Research-and-Production Center Open Joint-Stock Company Research-and-Production Association Mars, Candidate of Engineering; graduated from the Faculty of Radioengineering of Ulyanovsk Polytechnic Institute; Director General of Federal Research-and-Production Center Open Joint-Stock Company Research-and-Production Association Mars; author of articles in the field of CAD [e-mail: mars@mv.ru]V. Maklaev

Pseudocode Programmed Control of Workflows for Design of Computer-aided Systems 29_6.pdf

The article presents facilities and a language for pseudocode programming of workflows, designed for algorithmic representation of business processes to be executed in design of computer-aided systems. The specific character of the language consists in its orientation to intelligent processor (designer role) which shares common work with computer processor and other business-process executers.

Computer-aided design, workflow, software, pseudocode programming.

2012_ 3

Sections: Computer-aided design systems

Subjects: Computer-aided engineering, Automated control systems.


Alexey Sergeevich Markov, Research-and-Production Association Eshelon, JSC, Candidate of Engineering, Associate Professor at the Chair Information Security at Bauman Moscow State Technical University, CISSP, SBCI; Director General of Research-and-Production Association Eshelon, JSC; interested in testing and certifying of software as per requirements of information security, software reliability. [e-mail: mail@npo-echelon.ru]A. Markov,

Valentin Leonidovich Tsirlov, Research-and-Production Association Eshelon, JSC, Candidate of Engineering, Associate Professor at the Chair Information Security at Bauman Moscow State Technical University, CISSP, AMBCI; Executing Chief Manager of Research-and-Production Association Eshelon, JSC; interested in audit of security and formal verification of software and computer-aided systems, control of information security. [e-mail: mail@npo-echelon.ru]V. Tsirlov,

Sergey Anatolyevich Smolin, FRPC OJSC RPA Mars, Graduated from the Faculty of Mechanics and Mathematics at Ulyanovsk State University; head of a research laboratory at FRPC OJSC RPA Mars; author of articles in certification in the field of information security. [e-mail: mars@mv.ru]S. Smolin,

Andrey Sergeevich Korsunky, FRPC OJSC RPA Mars, Candidate of Engineering, graduated from the Faculty of Radio-Communications at Ulyanovsk branch of the Military Communications University, finished his post-graduate studies at the Military Communications Academy named after S. Budenny; lead programmer of FRPC OJSC RPA Mars; author of articles and inventions in the field of radio-electronics protection, communications and information security. [e-mail: aksspb@mail.ru]A. Korsunky

Modern Methods of Certification Tests of Software Codes Without Source Codes 24_13.pdf

The article researches features of state-of-the-art systems of software development from the point of view of audit of security and certification tests of software without source codes. It also shows possible detection of vulnerability, bookmarks and errors as well as development of certification-test reports for the programming environments JVM (Java) and .NET (C#).

Software, vulnerability, not declared capabilities, certification, information security, security audit.

2011_ 2

Sections: Telecommunications systems and computer networks

Subjects: Information systems.


© FRPC JSC 'RPA 'Mars', 2009-2018 The web-site runs on Joomla!