ISSN 1991-2927
 

ACP № 4 (62) 2020

Author: "Denis Aleksandrovich Evsevichev"

Anastasia Evgenevna Bulatova, Postgraduate Student of the Aviation Technology Department at the Ulyanovsk Civil Aviation Institute n.a. Chief Marshal of Aviation B.P. Bugaev; graduated from the Faculty of Flight Operations and Air Traffic Control at the same Institute; an author of articles in the field of flight electronic support, avionics. e-mail: bulatova26nastya@gmail.comA.E. Bulatova

Denis Aleksandrovich Evsevichev, Candidate of Sciences in Engineering; graduated from the Radioengineering Faculty of Ulyanovsk State Technical University; Associate Professor of the Air Traffic Control and Navigation Department at the Ulyanovsk Civil Aviation Institute n.a. Chief Marshal of Aviation B.P. Bugaev; an author of articles and monographs in the field of computer-aided design, flight electronic support, and optoelectronics. e-mail: denistk_87@mail.ruD.A. Evsevichev

Oksana Vadimovna Maksimova, Candidate of Sciences in Engineering; graduated from the Radioengineering Faculty of Ulyanovsk State Technical University; Head of the Research and Development Department at the Ulyanovsk Civil Aviation Institute n.a. Chief Marshal of Aviation B.P. Bugaev; an author of articles and monographs in the field of computer-aided design, optoelectronics. e-mail: first32007@yandex.ruO.V. Maksimova

Mikhail Konstantinovich Samokhvalov, Doctor of Sciences in Physics and Mathematics, Professor; graduated from the Faculty of Physics of Saratov State University; Head of the Design and Technology of Electronic Devices Department at Ulyanovsk State Technical University; an author of articles and monographs in the field of computer-aided design, optoelectronics. e-mail: sam@ulstu.ruM.K. Samokhvalov

Program development for designing simulators of advanced flight electronic support systems62_14.pdf

The main radio equipment used by aviation specialists are communication, radar and radio navigation systems. Training of students in these areas is a complex task that requires significant efforts of lecturer. The article proposes a concept of simulator designing that are supposed to be adopted in the educational process of civil aviation institutions based on hybrid approach to the virtual simulators designing. Such concept was applied in the development of methodology for designing of simulators for flight electronic support, which involves solving the problem of selective structural synthesis. The problem of selective structural synthesis of design solutions is described using a morphological tree and implies finding the graph edge that ensures meeting a set of rules with the constraints specified in the process of specification drawing up, which is replenished by the developer-user. Due to random nature, the structural optimization method implies a sequential search for possible options. A computer-aided system of simulator designing for flight electronic support systems was developed based on the methodology. The development of a computer-aided system of simulator designing for radio communications, radar and navigation equipment makes it possible to provide effective training of future pilots and air traffic control officers.

Automation, air traffic control officer, pilot, aeronautical communications, radar, radio navigation, training.

2020_ 4

Sections: Computer-aided engineering

Subjects: Computer-aided engineering.



Denis Aleksandrovich Evsevichev, Ulyanovsk Civil Aviation Institute n. a. Marshal of the Air Force B.P. Bugaev, Candidate of Science in Engineering; graduated from the Radioengineering Faculty of Ulyanovsk State Technical University; Associate Professor of the Department of Air Traffic Control and Navigation of the Ulyanovsk Civil Aviation Institute n. a. Marshal of the Air Force B.P. Bugaev; an author of articles in the field of computer-aided design and optoelectronics. [e-mail: denistk_87@mail.ru]D. Evsevichev,

Mikhail Konstantinovich Samokhvalov, Ulyanovsk State Technical University, Doctor of Sciences in Physics and Mathematics, Professor; graduated from the Faculty of Physics of Saratov State University; Professor at the Department of Design and Technology of Electronic Devices of Ulyanovsk State Technical University; an author of articles in the field of optoelectronics.[e-mail: sam@ulstu.ru]M. Samokhvalov

Automated Selection of Designs for Thin-Film Electroluminescent Displays for Avionics 56_13.pdf

The development of methods and means for testing the applicability of thin-film electroluminescent indicator devices as displays for displaying navigation and technical information in aircraft is carried out. Thin-film electroluminescent displays are used in equipment and systems that require high image quality and reliability as well as a long service life of the devices. The result of the performed work is the ExpAT program, which allows to carry out a computational experiment to test of the applicability of the TFEL indicator devices in aeronautical engineering. The algorithm of the program includes iterative calculations of the indicator parameters at user-defined intervals, comparing them with the specified ones and recording the results. As a result of the computational experiment, variants of structures of thin-film emitting structures that meet the operating conditions of indicators in avionics are shown.

Aircraft engineering, electroluminescence, indicator, simulation experiment.

2019_ 2

Sections: Electrical engineering and electronics

Subjects: Electrical engineering and electronics.



Denis Aleksandrovich Evsevichev, Marshal Bugaev Ulyanovsk Civil Aviation Institute, Candidate of Engineering; graduated from the Faculty of Radioengineering of Ulyanovsk State Technical University; Associate Professor at the Department of Air Traffic Control and Navigation of Marshal Bugaev Ulyanovsk Civil Aviation Institute; an author of articles in the field of automated design and optoelectronics. [e-mail: denistk_87@mail.ru]D. Evsevichev,

Mikhail Konstantinovich Samokhvalov, Ulyanovsk State Technical University, Doctor of Physics and Mathematics, Professor; graduated from the Faculty of Physics of Saratov Chernyshevsky State University; Head of the Department of Electronic Instrumentation Design and Technology at Ulyanovsk State Technical University; an author of articles in the field of optoelectronics. [e-mail: sam@ulstu.ru]M. Samokhvalov

Automated Calculation of Ergonomic Parameters of the Information Display Means At the Workplace of the Air Traffic Controller 000_10.pdf

One of the most important elements of a workplace of an air traffic controller of air traffic services are means of displaying information ensuring the functioning of the man-machine mode in accordance with the system standards of ergonomic requirements and ergonomic assurance. The analysis and comparison of parameters of information displays for the workplace of the air traffic controller was held in the article from the point of view of manufacturability, ergonomics and safety. The thin-film electroluminescent displays are preferred to use taking into account the implementation of regulatory requirements. In the framework of the ergonomic design, the software for calculation of brightness parameters of indicators and the distance location of the screen relative to the operator: minimum and maximum values of optimum and maximum permissible distances of observation was developed. The software module was written in Object Pascal in the Delphi 7 environment. The presented software product provides automation of calculations of the ergonomic characteristics necessary in design of the working environment and workstation of an air traffic controller, and can also be used for other workstations.

Automation, displays, ergonomics, air traffic controller.

2017_ 3

Sections: Information systems

Subjects: Information systems.


Denis Aleksandrovich Evsevichev, Ulyanovsk State Technical University, Post-graduate Student at Ulyanovsk State Technical University; graduated from Ulyanovsk State Technical University with the speciality in Electronic Instrumentation Design and Technology; an author of articles in the field of optoelectronic and circuitry engineering; has certificate of registration of software in the same field of research. [e-mail: denistk_87@mail.ru]D. Evsevichev,

Oksana Vadimovna Maksimova, Ulyanovsk State Technical University, Candidate of Engineering, graduated from Ulyanovsk State Technical University with the speciality in Electronic Instrumentation Design and Technology; Associate Professor at the Department of Electronic Instrumentation Design and Technology of Ulyanovsk State Technical University; an author of articles and monographs in the field of optoelectronic and microwave engineering. [e-mail: first32007@yandex.ru]O. Maksimova,

Mikhail Konstantinovich Samokhvalov, Ulyanovsk State Technical University, Doctor of Physics and Mathematics, Professor; graduated from Saratov State University with the speciality in Semiconductors and Dielectrics; a head of the Department of Electronic Instrumentation Design and Technology at Ulyanovsk State Technical University; an author of articles and monographs in the field of optoelectronics. [e-mail: sam@ulstu.ru]M. Samokhvalov

A Solution of Computer-aided Design of the Thin-film Electroluminescent Indicators 33_10.pdf

A development and a solution of designing problems of the advanced thin-film electroluminescent (TFEL) display devices is an important undertaking in the engineering field. The development and optimization of the TFEL display design is a complex task and requires a considerable work of the engineer. The solution of this problem can be accomplished by the use of automation means. Therefore, the development of the TFEL indicator design algorithm and calculation program is essential.

Thin films, electroluminescence, display, design.

2013_ 3

Sections: Computer-aided design system

Subjects: Computer-aided engineering, Electrical engineering and electronics.


© FRPC JSC 'RPA 'Mars', 2009-2018 The web-site runs on Joomla!