ISSN 1991-2927
 

ACP № 1 (59) 2020

Author: "Maksim Viacheslavovich Grishin"

Maksim Viacheslavovich Grishin, Ulyanovsk Instrument Manufacturing Design Bureau Joint-Stock Company, Candidate of Engineering; graduated from the Faculty of Aircraft Construction of the Institute of Aviation Technologies and Managements of Ulyanovsk State Technical University; Design Engineer at Ulyanovsk Instrument Manufacturing Design Bureau Joint-Stock Company; an author of articles in the field of CAD-systems. [e-mail: likani7@mail.ru]M. Grishin,

Pavel Iurievich Pavlov, Ulyanovsk Instrument Manufacturing Design Bureau Joint-Stock Company, Postgraduate Student at Ulyanovsk State Technical University; graduated from the Faculty of Aircraft Construction of the Institute of Aviation Technologies and Managements at Ulyanovsk State Technical University; Design Engineer at Ulyanovsk Instrument Manufacturing Design Bureau Joint-Stock Company; an author of articles in the field of manufacturing problems and classifiers. [e-mail: pavel.y.pavlov@mail.ru]P. Pavlov,

Petr Ivanovich Sosnin, Ulyanovsk State Technical University, Honored Worker of the Higher School of the Russian Federation, Doctor of Engineering, Professor; graduated from the Radioengineering Faculty of Ulyanovsk Polytechnic Institute; Head of the Department of Computer Science at Ulyanovsk State Technical University; an author of numerous works in the field of conceptual design of computer-aided systems. [e-mail: sosnin@ulstu.ru]P. Sosnin,

Vadim Vladimirovich Plutakhin, Ulyanovsk Instrument Manufacturing Design Bureau Joint-Stock Company, graduated from the Faculty of Aircraft Construction of the Institute of Aviation Technologies and Managements of Ulyanovsk State Technical University; Design Engineer at Ulyanovsk Instrument Manufacturing Design Bureau (UIMDB) Joint-Stock Company; interested in the field of CAD-systems. [e-mail: plutahin@ukbp.ru]V. Plutakhin

The Application of Design Ontologies in Technological Preparation of Aircraft Production 000_7.pdf

Currently, the use of ontologies in the aviation industry has not yet been properly developed but the analysis of domestic and foreign authors’ works shows the positive dynamics of the intelligent support systems implementation in this area. The article is devoted to the creation of tools for ontological support of works at the stage of technological preparation of aircraft production on the basis of the authoritative approach allowing to carry out experiments with semantic models of diversified production tools at the stage of technical specification and to make decisions on the appearance of the support system artifacts constructive on the basis of the obtained results. Due to the fact that the design process is carried out with the use of a vocabulary and controlled semantics, the proposed means will allow to ensure effective interaction dialogue "designer -system" (in this case, the design is carried out using professional natural language) and also to accumulate, process, and store design and construction knowledge in the form of experienced units.

Ontology, production technological preparation, intelligent system, industrial equipment, aircraft.

2016_ 4

Sections: Computer-aided engineering

Subjects: Computer-aided engineering.


Maksim Viacheslavovich Grishin, Ulyanovsk State Technical University, Post-Graduate Student at Ulyanovsk State Technical University; graduated from the Faculty of Aircraft Construction of Ulyanovsk State Technical University; Senior Teacher of the Aircraft Construction Department at the Aircraft Consulting Faculty of Ulyanovsk State Technical University; an author of articles in the field of computer-aided design systems. [e-mail: likani7@mail.ru]M. Grishin,

Viktor Ivanovich Kochergin, 753d Quality Control Agency of the Ministry of Defense of the Russian Federation, Candidate of Engineering; graduated from Perm Higher Command Engineering College of Strategic Missile Troops; Specialist at the 753d Quality Control Agency of the Ministry of Defense of the Russian Federation; an author of articles in the field of computer-aided design systems. [e-mail: kochergin_wik@mail.ru]V. Kochergin,

Sergei Nikolaevich Larin, Federal Research-and-Production Center Open Joint-Stock Company ‘Research-and-Production Association ‘Mars’, Candidate of Engineering; Associate Professor of the Aircraft Construction Department at the Aircraft Consulting Faculty of Ulyanovsk State Technical University; graduated from the Faculty of Aircraft Construction of Ulyanovsk State Technical University; finished his post-graduate and doctoral studies at the same University; Deputy Head of the Complex Production and Engineering Department at Federal Research-and-Production Center Open Joint-Stock Company ‘Research-and-Production Association ‘Mars’; an author of articles in the field of computer-aided design systems. [e-mail: larinmars@rambler.ru]S. Larin

Ontology As Mean of Master Tooling Engineering for Knowledge-intensive Pre-production 39_12.pdf

The engineering process improvement of machining attachments (by the example of master tooling) in knowledge-intensive industnes with respect to the development of an ontological suppot complex is a goal of the present article.At present, a design engineer implements an engineering proces of electronic analogs for master tooling manually. There manufacturing conditions referred to as 'hand-made' is a quite complex and effortful process.

Ontology, master tooling, classifier, pseudo-code modeling, engineering.

2015_ 1

Sections: Computer-aided engineering

Subjects: Computer-aided engineering.


© FRPC JSC 'RPA 'Mars', 2009-2018 The web-site runs on Joomla!