ISSN 1991-2927
 

ACP № 2 (56) 2019

Section: "ELECTRICAL ENGINEERING AND ELECTRONICS"

Vladimir Vasilyevich Sukhov, A Way of Modeling of Strength and Vibration-protection Systemsfor Radio Devices Vladimir Vasilyevich Sukhov, Joint Stock-Company Concern 'Morinformsystem-Agat' (Moscow), Candidate of Engineering, graduated from the Faculty of Mechanical Engineering of Bauman Moscow State Technical University in the profession 'Radiomechanical Devices'; leading staff scientist; author of articles, holds patents in the field of trials and calculations of dynamics and strength of radio equipment, system of vibration isolation, vibroacoustic and noise characteristics, thermal conditions [e-mail: vsuhov51@yandex.ru]V. Sukhov

A Way of Modeling of Strength and Vibration-protection Systemsfor Radio Devices 27_4.pdf

Optimization of vibroprotection systems for radio devices is an essential element for increase of reliability and strength. Under permanent increase in prices of similar equipment, modeling of its mechanical strength at all the design stages lets ensure compliance with reliability requirements and replace mechanical trials of devices with modeling.

Radio equipment, vibroprotection, device design, modeling, strength, stability.

2012_ 1

Sections: Mathematical modeling, calculi of approximationsandsoftware systems

Subjects: Mathematical modeling, Electrical engineering and electronics.


Yulia Alexanderovna Demina, Federal State Budgetary Higher Professional Educational Institution 'State University - Educational Research and Production Complex' (city of Orel), Graduated from the Faculty of Electronics and Instrument Making of the Federal State Budgetary Higher Professional Educational Institution 'State University - Educational Research and Production Complex' (city of Orel); senior lecturer at the Chair 'Applied Mathematics and Information Science'; author of articles, a monograph, inventions in the field of automation of processes of thermoregulator inspection. [e-mail: virginia97@mail.ru]Y. Demina,

Elena Grigoryevna Demina, Federal State Budgetary Higher Professional Educational Institution 'State University - Educational Research and Production Complex', Graduated from the Faculty of Machine-Building of the All-Soviet Union Correspondence Machine-Building Institute; Associate Professor at the Chair 'Applied Mathematics and Information Science' of the Federal State Budgetary Higher Professional Educational Institution 'State University - Educational Research and Production Complex'; author of articles, monographs, inventions in the field of automation of processes of thermoregulator inspection. [e-mail: maxvolos@mail.ru]E. Demina,

Viktoria Yuryevna Presnetsova, Federal State Budgetary Higher Professional Educational Institution 'State University - Educational Research and Production Complex', Graduated from the Faculty of Electronics and Instrument Making of the Federal State Budgetary Higher Professional Educational Institution 'State University - Educational Research and Production Complex'; assistant lecturer at the Chair 'Information Systems'; author of articles, monographs, inventions in the field of automation of information-processing processes and rating of teaching staff. [e-mail: alluvian@mail.ru]V. Presnetsova,

Tatiana Gennadyevna Denisova, Federal State Budgetary Higher Professional Educational Institution 'State University - Educational Research and Production Complex', Graduated from the Faculty of New Technologies and Production Automation of the Federal State Budgetary Higher Professional Educational Institution 'State University - Educational Research and Production Complex'; post-graduate student at the Chair 'Computer-Aided Processes and Machines of Chipless Material Processing'; head of a laboratory at the Chair 'Applied Mathematics and Information Science'; author of papers in the field of automation of engineering-process control. [e-mail: tessa88@bk.ru]T. Denisova

A Test Computer-aided System for Inspection of Manometrical Thermoregulators 26_14.pdf

The article reveals results of a work on the third stage of Project 14.740.11.0546, which was carried out within the researches 'Instrument-Making Based on New Physical Principles'. It also deals with a new solution concerning inspection of manometric thermoregulators in a thermostatical pressure chamber of a computer-aided test bench.

Manometric thermoregulators, computer-aided test bench, pressure chamber, thermoelectric module, stabilizing system, heat model, aerodynamic model, thermodynamic model.

2011_ 4

Sections: Software and mathematical support of computers, computer systems and networks

Subjects: Electrical engineering and electronics, Automated control systems.


Anatoly Afanasyevich Gladkikh, Ulyanovsk State Technical University, Candidate of Engineering, graduated from the Military Communications Academy named after S. Budenny, finished his post-graduate studies of the same academy; doctoral student at Ulyanovsk State Technical University, Associate Professor at the Chair Telecommunications at Ulyanovsk State Technical University; author of a monograph, text-books, research papers in the field of noise-immune coding and information security; has certificates of authorship in the same field. [e-mail: a.gladfkikh@ulstu.ru]A. Gladkikh,

Ekaterina Sergeevna Borodina, Ulyanovsk State Technical University, Post-graduate student at the Chair Telecommunications at Ulyanovsk State Technical University, graduated from Ulyanovsk State Technical University; author of publications in the field of noise-immune coding. [e-mail: bes_forever87@mail.ru]E. Borodina,

Radik Shamilyevich Shakurov, Ulyanovsk State Technical University, Post-graduate student at the Chair Telecommunications at Ulyanovsk State Technical University, graduated from the faculty of computer-aided systems for troop control at Ulyanovsk Higher Military Communications Engineering College; has a certificate of authorship and publications in the field of soft decoding of noise-immune codes. [e-mail: ramazat@mail.ru]R. Shakurov

Decoding of Non-binary Codes in Adaptive Data-exchange Systems 24_9.pdf

The article deals with theoretical, practical and organizational aspects of intellectualization of system-engineering processes in life cycle of computer-aided systems. It also presents models of quality assessment for design decisions and technological maturity of design and development processes of computer-aided systems.

Non-binary code, soft decoder, noise immunity, cascade code, index of character reliability, ordered statistics.

2011_ 2

Sections: Mathematical modeling, calculi of approximations and software systems

Subjects: Mathematical modeling, Automated control systems, Electrical engineering and electronics.


Ildar Robertovich Tueshev, [e-mail: mars@mv.ru] I. Tuyeshev

Parametric Testing of Electronic Modules and Boards With Elements Using Adapter Method. Manufacture of Adapters. 18_15.pdf

The research article deals with a method for check of modules and boards with elements at specialpurpose equipment using adapter. It also cites required equipment, materials and jigs for manufacture of adapters.

Parametric testing of modules, adapter, design, adapter method.

2009_ 4

Sections: Production technology. equipment and facilities

Subjects: Electrical engineering and electronics.


Marat Faritovich Gilvanov[e-mail: mars@mv.ru] M. Gilvanov

High-speed Multipliers With Variable Capacities on Basis of Epld-technologies 16_11.pdf

The article deals with algorithms of product during multiplication of data with variable capacity. In order to present data the code 'advanced carry bit' is used. In the used code each number is presented by group field. Each group is processed independently. This fact substantially increases efficiency of operations. The article analyses different methods of field multiplication. It also defines time characteristics of subsequent, vector and matrix multiplier.

Epld, multiplication methods, multiplier.

2009_ 2

Sections: Theoretical problems of design automation

Subjects: Electrical engineering and electronics.


Liliya Irfanovna Suleymanova, [e-mail: mars@mv.ru]L. Suleymanova,

Alexander Ivanovich Lyakov, [e-mail: mars@mv.ru] A. Lyakov

Methods of Short Fail-safety Tests of Devices and Units Within Naval C2 Systems 15_7.pdf

The article summarizes methods of fail-safety test speeding-up using speedup factors intensifying device degradation as well as dicrease of fail-safety factor to be verified using approximation recalculation of test factor for operating time between failures according to value of fault rate within test time.

2009_ 1

Sections: Integrated c2 system: methodology for creation of systems, information technology, facilities and components

Subjects: Electrical engineering and electronics, Automated control systems.


Ildar Robertovich Tueshev, [e-mail: mars@mv.ru] I. Tueshev

Experience of Implementation of New Computer-aided Smt Line in Actual Manufacturing Environment 15_15.pdf

The article reveals some features of implementation of new equipment within computer-aided SMT (Surface Mount Technology) production line in actual manufacturing environment. The sample solutions of installation and startup problems are cited.

2009_ 1

Sections: Theoretical issues of automation of command and control processes

Subjects: Electrical engineering and electronics, Automated control systems.


Vyacheslav Petrovich Makhitko[e-mail: mars@mv.ru]V. Makhitko

Model of Generation of Operation Programs for High Technology Products on Basis of Queueing Theory 15_8.pdf

The article deals with generalities and generation of operation programs, decision-making analysis and management principles. The article cites mathematical models of complex technical systems of queueing to determine and control their reliability during operation process.

2009_ 1

Sections: Electronic and electrical engineering

Subjects: Electrical engineering and electronics.


[e-mail: mars@mv.ru ]V. Makhitko

Model of Generation of Operation Programs for High Technology Products on Basis of Queueing Theory 15_8.pdf

The article deals with generalities and generation of operation programs, decision-making analysis and management principles. The article cites mathematical models of complex technical systems of queueing to determine and control their reliability during operation process.

.

2009_ 1

Sections: Electronic and electrical engineering

Subjects: Electrical engineering and electronics.


[e-mail: mars@mv.ru ]V. Makhitko

Model of Generation of Operation Programs for High Technology Products on Basis of Queueing Theory 15_8.pdf

The article deals with generalities and generation of operation programs, decision-making analysis and management principles. The article cites mathematical models of complex technical systems of queueing to determine and control their reliability during operation process.

.

2009_ 1

Sections: Electronic and electrical engineering

Subjects: Electrical engineering and electronics.


© FRPC JSC 'RPA 'Mars', 2009-2018 The web-site runs on Joomla!